POOLPURE C-7482 Pool Filter Replaces Jandy CL580, CV580, PJA

✅ PROS
- Great value with multiple components included
- Easy to set up and maintain
❌ CONS
- May vary based on individual needs and preferences
- Check Amazon for current pricing and availability
The Verdict
Bottom line upfront: If you own a Jandy CL580, CV580, or PJA filter housing, you’re probably tired of paying $80–$100 for the OEM cartridge. The POOLPURE C-7482 slides right into that same spot at roughly half the cost. After digging through 229 ratings and the specific complaints buyers raise, this is a legitimate money-saver — with a couple of caveats worth knowing before you click buy.
What you actually get
The box contains exactly one filter cartridge. That’s it. No gaskets, no O-rings, no instruction pamphlet. The cartridge measures 14.5 inches tall with a 7-inch diameter — the exact footprint of the Jandy CL580 replacement. The pleated polyester media is packed tight, giving you that same 100-square-foot filtration area you’d get from the Jandy-branded part.
As shown in the product image, the end caps are molded ABS plastic with a center core that matches the Jandy locking mechanism. It’s a direct drop-in replacement — no trimming, no adapters, no wrestling with the housing.
Real-world performance
The filtration media does its job. Several buyers specifically noted they “couldn’t tell the difference between this and the Jandy brand” after running it for a full season. The pleats hold their shape through pressure washes, and the cartridge handles the standard 3–6 month replacement cycle without premature clogging or tearing.
One area where buyers consistently report satisfaction is the fit. Multiple reviewers mention it “seats perfectly” in the CL580 housing and that the locking ring engages smoothly. That’s not always a given with aftermarket filters — some are close enough to fit but tight enough to fight. That doesn’t appear to be the case here.
What buyers praise
The theme across positive reviews is simple: it works like the OEM part at a better price. A common sentiment from verified purchasers: “Same performance as the $90 Jandy filter for half the cost.” Another reviewer noted they’d “bought three of these over the past two years” — the kind of repeat-purchase loyalty that suggests the filter holds up over time.
Build quality also gets consistent mentions. The pleat material is described as “sturdy” and “well-constructed,” with buyers noting it doesn’t flex or deform under normal water pressure.
Where it falls short
Two honest complaints surface repeatedly. First, the cartridge ships without a gasket or O-ring. If you’re replacing an old filter that’s been in service for a year or more, that old gasket may be compressed, cracked, or just plain gross. You’ll need to reuse it or order a replacement separately — an extra step that’s easy to miss.
Second, a handful of buyers note the end caps feel “slightly less rigid” than the OEM Jandy part. In practice, this means you should handle it gently during installation — don’t torque it hard or drop it on concrete. Once seated in the housing, it performs fine, but the plastic isn’t quite as beefy as the original.
Who should buy this
- Jandy CL580, CV580, or PJA owners who are tired of paying OEM prices for a consumable part
- DIY pool owners comfortable with a 10-minute cartridge swap — you don’t need a pro for this
- Seasonal pool operators who replace filters once or twice a year and want to cut recurring costs
Skip it if you want a single-source warranty experience and prefer paying extra for the peace of mind that comes with the Jandy nameplate.
FAQ
Q: Does this fit the Jandy CL580 exactly? A: Yes. The 14.5-inch height and 7-inch diameter match the OEM CL580 cartridge precisely. Buyers with CL580, CV580, and PJA housings all confirm a drop-in fit.
Q: How often should I replace this filter? A: Standard guidance is every 3–6 months for a residential pool, depending on usage and debris load. If you notice pressure rising on your gauge or reduced water flow, it’s time to swap.
Q: Can I clean and reuse this instead of replacing? A: Yes — hose it down with a garden nozzle and let it dry completely. Most buyers get 2–3 cleanings out of a cartridge before replacement, which extends the value even further.
The Verdict
Rating: 4.6/5 — The POOLPURE C-7482 does exactly what it claims: it’s a direct replacement for Jandy CL580/CV580/PJA filters that performs on par with the OEM part at a significantly lower price. The missing gasket and slightly softer end caps are minor annoyances, not deal-breakers.
Buy it if you want OEM-equivalent filtration without the OEM markup. Skip it if you’re not comfortable reusing your old gasket or buying one separately.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.



