Long Hold It Mate Hook Kits Ideal for Bird Feeders, Lighter

The Verdict

The $15 Fix for Your Bird Feeder Annoyances

Let’s cut to it: if you’re hanging bird feeders, you’ve likely dealt with squirrels leaping from nearby structures or feeders clanging against shepherd’s hooks in every breeze. The Long Hold It Mate Hook Kits attack that specific problem with a simple but effective design — a 12-inch horizontal extension that pushes your feeder away from whatever it’s mounted on.

What You Actually Get

This kit ships with two complete hook assemblies. Each one consists of a pointed ground stake, a vertical riser, and that signature 12-inch horizontal arm with a curved hook at the end. The entire unit is constructed from galvanized steel — no painted coating that’ll flake off after one winter. The finish is matte gray and unobtrusive; it won’t draw attention away from your garden.

Installation is genuinely tool-free. The stake end is sharp enough to push into prepared soil by hand, though you’ll want a mallet or your boot heel for compacted ground. Once seated, the hook arm swivels at the joint, letting you position the hanging point exactly where you need it.

Real-World Performance

I tested these alongside a standard 5-pound tube feeder and a heavier platform feeder. The galvanized steel handled both without visible flex or bending at the joint. The 12-inch reach makes a tangible difference — a feeder hung from this hook clears the edge of a deck railing or fence by a comfortable margin, which means fewer squirrel launch points and zero feeder-on-structure collisions during wind.

The ground-stake version holds up respectably in normal conditions. In my testing, it stayed put through moderate gusts with a filled feeder attached. The pointed tip penetrates turf easily, and the vertical shaft sits flush enough that it won’t trip anyone walking by.

What Buyers Keep Saying

The 4.6-star average across 229 ratings reflects genuine satisfaction. One reviewer noted, “I bought these to extend my feeders away from the fence where squirrels were jumping from. They work perfectly — no more squirrels reaching the feeder.” Another echoed the build quality: “These are heavy-duty and well made. The galvanized finish has held up through rain and snow with zero rust.”

The swivel feature earns consistent praise too. Multiple buyers mention appreciating the ability to rotate the hook arm for precise feeder placement rather than being locked into a fixed position.

Where It Falls Short

Let’s be honest about limitations. The single-point ground stake isn’t a permanent solution — in loose, sandy, or freshly tilled soil, it can shift under heavier feeders when the wind picks up. If you’re hanging something substantial like a 10-pound platform feeder, you’ll want to drive the stake deeper or add a secondary anchor.

The hook diameter is also on the narrower side. It accommodates standard feeder chains and cables without issue, but thicker-gauge hanging hardware or stacked multiple feeders on one hook creates a tight fit. Plan accordingly if you’re running a serious feeding station.

Who Should Buy This

• Railing and fence hangers: If squirrels use nearby structures as launchpads, the 12-inch offset will frustrate them.
• Deck dwellers: Keep feeders off railings entirely with the ground stake version.
• Windy yard sufferers: The extension prevents feeder-to-structure collisions that scatter seed.
• Container gardeners: Hang lightweight baskets and small feeders from these without permanent mounting.

Skip it if you need a permanent in-ground mount for heavy feeders, or if you’re working with loose soil that won’t hold a single stake reliably.

FAQ

Q: Will these hold a standard tube bird feeder? A: Yes. A typical 3-5 pound tube feeder hangs easily from the hook with no flex in the arm.

Q: Do the stakes rust after a season outside? A: The galvanized coating resists rust effectively. Buyers report no corrosion after full-year exposure, though normal wear can occur at scrape points.

Q: Can I attach these to a shepherd’s hook instead of the ground? A: The included hardware is a ground stake, not a clamp. However, the hook arm’s diameter fits standard shepherd’s hook tops if you’re handy with minor modifications.

The Verdict

Buy it if you want a simple, affordable way to extend feeder reach and reduce squirrel access without permanent installation. The galvanized build and 12-inch offset deliver real value for the price.

Skip it if you need a heavy-duty permanent mount for large feeders or have loose soil that won’t hold a single stake.

Rating: 4.6/5 — A well-executed solution to a common backyard problem, with minor stability caveats that don’t diminish its usefulness for most buyers.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.