Honda HRX Blade Kit, (1) 72511-VH7-000 Blade & (1) 72531-VH7

The Verdict

The Right Blades for Your Honda HRX — No Guesswork

If you own a Honda HRX217 mower, you know it’s a premium machine. But the stock blades wear out — usually faster than you’d expect if you’re cutting in sandy soil or hitting the occasional rock. When that day comes, you have two options: gamble on a cheap aftermarket blade that might not sit right, or buy the genuine Honda replacement kit. This kit, containing the 72511-VH7-000 main blade and the 72531-VH7 microcut blade, is the latter. For most HRX owners, it’s the right call.

What’s Actually in the Box

You get two blades: the main cutting blade (72511-VH7-000) and the smaller secondary “microcut” blade (72531-VH7) that Honda’s twin-blade system uses to recut clippings for finer mulching. Both are stamped steel with the factory heat-treating and edge grind. There’s no hardware in the box — no bolts, washers, or centering pin. You’ll reuse the existing mounting hardware from your old blades, which is fine as long as it’s not corroded.

Real-World Performance

The twin-blade design is what makes the HRX’s mulching so good, and this kit preserves that. The main blade does the heavy lifting — cutting grass cleanly without tearing leaf tips, which keeps your lawn green instead of brown-edged. The microcut blade handles the recirculation, chopping clippings into tiny pieces that break down fast. In testing, the difference between a worn factory blade and this fresh set is immediately noticeable: cleaner stripes, less clumping, and no need to bag.

Installation is straightforward if you’ve done a blade swap before. Flip the mower, remove the old blades, and bolt these on. The bolt pattern matches the HRX217’s drive disc exactly. One tip: use a torque wrench and tighten to the spec in your owner’s manual (usually around 40 ft-lbs). Don’t guess — a loose blade is dangerous, and an over-torqued one can strip the adapter.

What Buyers Are Saying

With 240 ratings and a 4.8 average, the feedback is overwhelmingly positive. One verified buyer put it plainly: “These are the real deal. Perfect fit, no modifications. My HRX cuts like it did when it was new.” Another noted the value of going OEM: “I tried cheap blades once. They vibrated and left uncut strips. These are worth the extra money.”

The few negative reviews cluster around two complaints: price and shipping. Some buyers felt the kit was overpriced for two pieces of steel. Others received blades with minor cosmetic surface rust from storage — harmless, but worth wiping down before install.

Where It Falls Short

Honestly, the main drawback is cost. Aftermarket options from Oregon or MaxPower run $20–25 for equivalent blades. You’re paying a premium for the Honda logo and guaranteed fit. If you’re mechanically confident and don’t mind a little filing to make aftermarket blades work, you can save money. But if you want zero hassle and factory performance, this kit justifies its price.

Also note: this kit is specifically for HRX217 models with the twin-blade system. It won’t fit older HRR series or the smaller HRC models. Double-check your mower’s model number before ordering.

Who Should Buy This

• HRX217 owners who want a guaranteed OEM fit — this is the safest choice, period.
• Anyone who mows weekly and mulches — the twin-blade system excels here, and fresh blades make a visible difference.
• Buyers tired of aftermarket vibration or poor cut quality — genuine Honda blades are balanced from the factory.

FAQ

Q: Will these fit my Honda HRR216 mower?
A: No. The HRR series uses a single blade with a different bolt pattern. This kit is only for HRX217 models with the twin-blade Versamow system.

Q: How often should I replace these blades?
A: For average residential use (about 1 acre or less), every 2–3 seasons or when you notice tearing instead of clean cuts. If you hit rocks or sandy soil, inspect them sooner.

Q: Do I need to replace both blades at once?
A: Yes. The main blade and microcut blade work together. Replacing only one throws off the balance and reduces mulching quality.

The Verdict

Buy it if: You own an HRX217 and want blades that fit perfectly, cut cleanly, and restore the mower’s factory mulching performance. The warranty peace of mind and zero-hassle installation make the premium worth it.

Skip it if: You’re on a tight budget and willing to modify aftermarket blades, or if you have an older HRR model that won’t take these at all.

Rating: 4.6/5 — Deducting half a star for the missing hardware and the premium price. But for the core job — cutting grass well — these are the best replacement blades you can buy for your Honda.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.