WPW10314173 W10314173 Dryer Drum Support Roller Kit Dryer Dr

The Verdict

If your dryer started sounding like a jet engine during the spin cycle — or worse, thumping like a washing machine with a brick inside — you’re likely looking at worn drum support rollers. The WPW10314173 kit addresses exactly that failure point. After digging through 229 ratings and the engineering specs, here’s what you need to know before you spend a dime.

What’s Actually in the Kit

You get two rear drum support rollers with their axles. That’s it — no brackets, no fasteners, no grease packet. The rollers are the critical wear items here. They’re molded with a smooth, dense polymer surface that rides against the dryer drum’s outer rim. The axles are steel, machined to the same tolerances as the OEM W10314173 part. If your dryer is throwing a squeak every rotation, these are the culprits 80% of the time.

Real-World Performance

The install is straightforward if you’re even mildly handy. Unplug the dryer, remove the front panel or top (depending on your model), pull the drum forward, and swap the rollers. Plan on 30–60 minutes total. Several reviewers noted the rollers fit snugly with zero play on the axle shaft — that’s the tolerance you want. Loose-fitting aftermarket rollers cause the drum to wobble and accelerate wear on the bearing surfaces.

One recurring theme in the feedback: this kit fixes the noise problem permanently, not just temporarily. Multiple buyers mentioned their dryers had been squeaking for months before they finally replaced the rollers. One reviewer wrote, “Quiet as new after install. Should have done this six months ago.” Another noted, “The old rollers were flat on one side — these are perfectly round and the drum spins smooth.”

Where It Falls Short

The fitment is the catch. This kit is designed for specific Whirlpool, Maytag, and Kenmore dryers that use the W10314173/W10314171 roller assembly. It is not universal. Check your model number against the compatibility list before ordering — returns are easy but wasted time isn’t. Also, the kit doesn’t include the mounting screws or clips. Most people reuse the originals without issue, but if yours are corroded or stripped, you’ll need a separate trip to the hardware store.

A handful of reviewers reported the axle fit was too tight on certain models and required light sanding. That’s a minor annoyance, not a dealbreaker — but worth knowing if you’re not comfortable with light modification.

Who Should Buy This

• DIY homeowners with a squeaky or thumping dryer who want the OEM-equivalent fix at a fraction of the appliance-repair shop cost (which typically runs $150–$250 for parts and labor).
• Landlords or property managers maintaining multiple Whirlpool-family dryers — this is a cheap, reliable part to stock.
• Anyone with a dryer over 5 years old who’s hearing rhythmic noise. If you’re already replacing the belt, do the rollers at the same time; they’re right there.

Skip it if you have an LG, Samsung, or GE dryer — this won’t fit. Also skip if you’re not comfortable removing your dryer’s front panel; call a pro instead.

FAQ

Q: How do I know if this fits my dryer? Check the model number on the dryer’s door frame or back panel. Cross-reference against the compatibility list on the product page. Whirlpool, Maytag, and some Kenmore models from the last 15 years are the primary candidates.

Q: Will this fix a loud squeaking noise? Almost certainly, if the noise is rhythmic and gets faster during the spin cycle. That’s the classic signature of a flat-spotted or worn roller. If the noise is a grinding or scraping, you may have a different issue like a failing drum bearing.

Q: Is this the same quality as the OEM Whirlpool part? Based on buyer feedback and the molded tolerances, it’s functionally identical. Several reviewers compared it side-by-side with the original and found no difference in fit or finish. At roughly half the OEM price, it’s the better value.

The Verdict: 4.6/5 — Buy it if you’ve diagnosed worn roller noise on a compatible Whirlpool-family dryer.

This is a solid, well-made replacement part that does exactly what it claims. The minor fitment quirks and missing hardware keep it from a perfect score, but for the price, it’s a fraction of a service call and will likely outlast your dryer’s remaining lifespan.

Buy it if you’re handy, your dryer matches the compatibility list, and you want to kill that squeak permanently. Skip it if your dryer is a different brand, you’re not comfortable with basic appliance disassembly, or you prefer having a pro handle it.

Either way, your ears will thank you.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.