WB44k10005 Oven Bake Element WB44K10001 Fit for G-E Hot-Poin
✅ PROS
- Functional design for everyday cooking
- Easy to incorporate into your kitchen routine
❌ CONS
- May vary based on individual needs and preferences
- Check Amazon for current pricing and availability
The Verdict
Your oven’s been running cold for a week. Cakes come out pale. The casserole’s raw in the middle. You’ve checked the thermostat, cleaned the oven, and still nothing. Chances are the bake element is burned out — and if you own a GE or Hotpoint range from the last two decades, you’re likely shopping for a WB44k10005. Here’s what you need to know before you click buy.
What’s in the box
The package contains exactly one thing: the bake element itself. It’s a single-piece tubular heating coil, roughly 20 inches wide when laid flat, with two terminal spade connectors on the back and two screw-mount brackets. The metal is a nickel-chromium alloy — the same class of material used in OEM elements — rated for 240V. If you’re replacing a burned-out element, you’ll see the break almost immediately: a bubble or blister in the tube where the wire inside snapped.
This is a direct swap for both the WB44K10005 and the WB44K10001 part numbers. That covers a wide swath of GE, Hotpoint, and even some Kenmore ranges from the mid-2000s onward. No adapters, no rewiring, no bracket fabrication. If your old part is one of those two numbers, this fits.
How it performs
The 240V output is the spec that matters. This element delivers the full rated wattage — typically around 3,500 watts depending on your model — which means it heats to broiling temperature in about 90 seconds and maintains a steady bake cycle. The coil geometry matches OEM, so heat distribution across the oven floor is even. No hot spots in the back corner, no undercooked edge near the door.
Installation is straightforward for anyone who’s replaced an oven element before. Unplug the range, pull the old element forward, disconnect the spade terminals, and reverse the process. Expect to spend about 15 minutes if you have a screwdriver and a pair of pliers. One caution: the terminals sit snug, but they’re not as tight as OEM. If your harness clips are worn, you might want to pinch them slightly with pliers before pushing the new element on — otherwise you risk a loose connection that trips the breaker.
What buyers say
The 4.4-star average across 220 ratings reflects a product that mostly does its job. One reviewer wrote, “Exact fit for my GE Profile. Took 10 minutes to install and the oven heats like new.” Another noted, “I was skeptical of a non-GE part, but this has been running flawlessly for six months.” The recurring theme is that it works — and works well — for the vast majority of installations.
Where it comes up short
The honest caveats are few but worth noting. First, no instructions. If you’ve never replaced an element, you’ll need to look up a YouTube video or find the manual for your specific range. Second, the packaging is minimal — a thin plastic sleeve — and the coil can arrive with a slight bend. It’s not damaged, but you’ll need to gently flex it back into shape before mounting. Third, a handful of buyers report the element failing within a year — not a majority, but enough to note that you’re trading OEM certainty for roughly half the price.
Who should buy this
Three specific buyer profiles fit this product well. First: the cost-conscious homeowner with a GE or Hotpoint range that’s otherwise in good shape — you don’t want to spend $200 on a service call for a $40 part. Second: the landlord or property manager maintaining multiple rental units — buy a couple of spares and keep them in the maintenance closet. Third: anyone with a dead oven who needs a fix this weekend and can’t wait for a dealer-ordered OEM part.
FAQ
Will this fit my GE model? Check your oven’s model number against the WB44K10005 or WB44K10001 cross-reference. If your range uses either part number, this is a direct fit. If you’re unsure, pull your old element and compare the terminal placement and mounting bracket spacing.
Do I need to hire an electrician? No. The element is wired through standard spade connectors, not hardwired. As long as you unplug the range and verify the power is off, this is a DIY job.
How long should it last? Most buyers report 1-3 years of regular use. Heavy daily baking will shorten that; occasional use can extend it. It’s not a lifetime part, but it’s a solid value at the price point.
The Verdict
Buy it if: You need a working bake element fast, you’re comfortable with basic DIY, and you’re not expecting OEM-grade longevity.
Skip it if: You want a warranty-backed OEM part, your harness terminals are worn, or you’re not confident working near 240V electrical connections.
Rating: 4.2/5 — A dependable, cost-effective replacement for GE and Hotpoint ranges that delivers OEM-level performance at a fraction of the price. The minor fit quirks and occasional early failures keep it from a perfect score, but for most shoppers, this is the right call.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.
More Kitchen Appliances Verdicts
