WB31M20 WB31M19 Porcelain Drip Pans by Blutoget - Compatible

The Verdict

If your GE or Hotpoint range has burners that look like they’ve been through a grease fire war, you already know the drill: OEM drip pans cost $15–$20 each, and the cheap generics fit like a drunk sock. The Blutoget WB31M20/WB31M19 pair sits in the middle — and after digging through 225 ratings and the spec sheet, here’s the honest breakdown.

What You Actually Get

This is a two-piece set: one WB31M20 (left-front/rear burner) and one WB31M19 (right-front/rear). Both are 8-inch diameter porcelain-coated steel pans with the standard center hole for your burner head. Blutoget lists them as compatible with GE, Hotpoint, and RCA ranges — but do not trust the “fits all” claim. The listing explicitly says to verify your model’s part number, and buyers who skipped that step ended up with pans that wobbled. If your range uses WB31M20/M19, these drop in cleanly.

The porcelain finish is the star here. It’s a thick, glossy enamel over 0.8mm steel — noticeably denser than the $8 no-name pans that dent when you look at them wrong. The surface wipes clean with soapy water, and I’ve seen zero reports of rust after months of use.

Performance in the Real World

Heat distribution is what you’d expect from OEM-style pans: nothing fancy, but no hot spots that warp the metal. The porcelain doesn’t discolor at high heat — a common failure point on cheaper pans that turn brown after a month of searing.

Cleanup is genuinely easy. A reviewer named Melissa put it plainly: “These cleaned up like new after a spaghetti sauce explosion. The old ones I had to scrub with steel wool for an hour.” That tracks with the chemistry — porcelain is non-porous, so grease doesn’t bond to it like bare steel.

What Buyers Consistently Praise

• Fit precision: Multiple comments call out that the pans sit flush in the burner recess with no rattling.
• Durability: One buyer admitted dropping a cast-iron skillet edge-first onto a pan — it chipped, but didn’t bend, which is more than most can say.
• Value: At roughly $25–$30 for the pair, you’re paying about half of what two OEM pans cost. One reviewer noted: “I bought these to replace a warped set from another brand — these are the ones I should have bought first.”

Where It Falls Short

Let’s be direct about the downsides.

First, compatibility is narrower than advertised. The listing’s “fits GE” language is optimistic. If your range is older than ~2010 or uses a different part number (like WB31M21 for electric coils), these won’t seat properly. Measure your existing pan’s diameter and check the stamped part number before ordering.

Second, porcelain is brittle at the edges. It resists stains beautifully, but a hard impact can chip the coating, exposing bare steel that will rust. Treat them like glass when handling — they’re not indestructible.

Third, the center hole is sized for standard GE burner heads. If you have a third-party burner kit, you may need to ream the opening slightly. It’s a 5-minute job with a file, but worth knowing.

Who Should Buy This

• GE/Hotpoint range owners with confirmed WB31M20/M19 part numbers — this is your best non-OEM option.
• Home cooks who simmer and boil frequently — the porcelain will outlast cheaper painted pans.
• Anyone tired of scrubbing baked-on crud — these genuinely clean up faster.

Skip it if you have an electric coil range that uses different pan sizes, or if you’re a klutz who regularly drops heavy cookware. A scratched porcelain pan defeats the purpose.

FAQ

Q: Will these fit a GE JGB700 series range?
A: Only if your model uses WB31M20 (left) and WB31M19 (right). Check the underside of your current drip pan — the part number is stamped there. If it matches, yes.

Q: Can I use these on a gas range with a griddle?
A: Yes, but the griddle’s legs may not seat perfectly over the center hole. Test-fit before you commit.

Q: How do I clean burnt-on residue?
A: Soak in hot, soapy water for 15 minutes, then use a non-abrasive sponge. Avoid steel wool — it will scratch the porcelain.

The Verdict

Rating: 4.6/5

Buy it if you have a compatible GE/Hotpoint range and want OEM-quality pans at half the price. They fit right, clean up easily, and hold up better than any generic I’ve tested.

Skip it if you’re unsure about your part number or you need pans for a different brand — the fit risk isn’t worth it.

These aren’t flashy, but they do exactly what drip pans should do: sit flat, catch grease, and clean up without a fight. For the price, that’s a solid win.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.