W10295370A Water Filter Replacement Compatible with W1029537

The Verdict

If your refrigerator’s been dispensing that metallic-tasting water for the past two months, you already know the problem. The W10295370A replacement filter is the fix — and at 4.6 stars across 229 ratings, it’s clearly working for most people. But is it the right filter for your specific fridge? Let’s dig past the star rating.

What You Actually Get

The box contains a single filter cartridge, pre-wrapped in sealed plastic. That’s it. No wrench, no O-rings, no instruction booklet beyond a basic diagram. The filter itself measures roughly 8 inches tall and 4 inches wide — standard for this form factor. As shown in the product image, the white plastic housing has the twist-lock tabs at the top that slot into your fridge’s filter compartment.

Real-World Performance

Here’s what matters: does it actually filter? The cartridge uses a carbon block core that’s certified against NSF/ANSI 42 and 53 standards. In practical terms, that means it’s reducing lead, chlorine taste and odor, cysts, and 23 other contaminants. Buyers consistently note the water tastes noticeably cleaner immediately after installation.

One buyer put it plainly: “Tastes exactly like the OEM filter at 40% less cost. I’ve used three of these now and haven’t noticed any difference in quality.”

Flow rate holds up well — about 0.5 gallons per minute, which is fine for filling a pitcher or a large pot. I haven’t seen complaints about slow dispensing, which often plagues cheaper knockoff filters.

Installation and Fit

The twist-and-lock design means you don’t need tools. Line up the tabs, push in, twist a quarter-turn clockwise until it stops. Most buyers report taking under five minutes. Here’s the catch — you need to run 3-4 gallons through the system afterward to clear the carbon dust. Skip this and your first glass will look like weak tea.

Compatibility covers Whirlpool, Maytag, KitchenAid, Amana, JennAir, and some Kenmore models. The filter replaces multiple OEM part numbers: W10295370, W1029537, EDR1RXD1, Filter 1, WHR1RXD1, and KAD1RXD1. That’s a wide net, but a handful of reviewers with older Kenmore units noted the fit felt slightly loose — nothing that caused leaks, just a less satisfying click.

What Buyers Consistently Praise

The value proposition comes up repeatedly. At roughly half the price of the OEM Whirlpool filter, buyers report the same water quality and no leak issues after months of use. Multiple reviewers mentioned using it across multiple filter changes without problems. One long-term owner said: “Six months in, still working perfectly. I’ll buy this again — same filtration, half the price.”

Where It Falls Short

The most significant gap: there’s no indicator light or date wheel to remind you when to replace it. You’ll need to set a calendar reminder or write the date on the filter housing with a marker. If you forget, the filter will keep working but with diminished effectiveness.

The included instructions are minimal — one small card with basic diagrams. If you’re not mechanically inclined, you might want to watch a YouTube video first. It’s not difficult, but the lack of detailed guidance is notable.

Another consideration: the push-to-connect fitting on the top is plastic, not brass. It’s durable enough for the application, but if you’re rough with installation, you could crack it. Install gently.

Who Should Buy This

Buy it if: You own a Whirlpool, Maytag, KitchenAid, or Amana refrigerator from the last decade and you’re tired of paying OEM prices for identical filtration. You’re comfortable setting a six-month reminder on your phone.

Skip it if: You have an older Kenmore model and want guaranteed OEM fit, or you need a filter with an integrated change indicator. In those cases, the extra cost of the genuine Whirlpool filter might be worth it for peace of mind.

FAQ

How often should I replace this filter? Every six months or 300 gallons, whichever comes first. If your water has heavy sediment, replace it more frequently.

Will this work in my Whirlpool refrigerator? Check your current filter’s part number. If it’s W10295370, W1029537, EDR1RXD1, WHR1RXD1, or KAD1RXD1, this is a direct replacement. When in doubt, measure your old filter against the dimensions listed.

Does it remove fluoride? No. This filter targets lead, chlorine, cysts, and particulates — not fluoride. If you need fluoride removal, you’d need a reverse osmosis system.

The Verdict

4.6/5 Stars

The W10295370A replacement delivers exactly what most people need: reliable filtration at roughly half the OEM cost, with easy installation and no leaks. The lack of a change indicator is a minor annoyance, not a dealbreaker. If you’re replacing the same filter in your Whirlpool-family fridge, this is a smart, budget-friendly choice that doesn’t compromise on water quality. Just set that reminder.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.