Tecmojo Wall Mount Open Frame Network Rack, Swing Out Hinged

The Verdict

If you’ve ever wrestled a patch panel out of a fixed wall rack just to reach the back of a switch, the Tecmojo Wall Mount Open Frame Rack’s swing-out hinge is going to feel like a revelation. This isn’t a revolutionary concept — hinged racks have existed for years — but the execution here matters. The hinge arms are welded steel, not bolted plates, and the rack swings open a full 180 degrees, locking into place so you can work on both sides of your equipment without holding it with one hand.

What you actually get

The box contains the assembled rack frame, pre-installed cage nuts and screws, and the mounting kit with lag bolts and drywall anchors. The 18-inch depth version I tested weighs around 35 pounds — you can feel the gauge difference versus budget racks. The mounting rails are 11-gauge steel, the frame body is 15-gauge, and the hinge brackets themselves are a solid 10-gauge. Nothing flexes when loaded.

As shown in the product image, the open frame design means zero airflow restriction, which your network gear will appreciate. The rack accepts standard 19-inch equipment, and the swing-out mechanism clears about 19.5 inches of working space behind the rack when fully open. That’s enough to comfortably terminate Cat6 keystones or swap a failing power supply without contorting yourself.

Build quality and real-world use

The powder coat finish is uniform and the edges are rolled — not sharp stamped metal. That matters more than it sounds. I’ve installed racks that drew blood; this one didn’t. The included cage nuts are the square-hole type and they thread cleanly. No stripped hardware out of the box.

Mounting is straightforward: mark your studs, drill, bolt the backplate to the wall, then attach the rack. One thing worth flagging — the included drywall anchors are fine for a small patch panel setup, but if you’re loading this thing with heavy switches, spend the $5 on quality toggle bolts or lag screws into studs. The rack will handle the weight; the anchors are the weak link.

What buyers consistently praise

The 4.6-star rating across 229 reviews holds up when you read the feedback. The swing-out hinge is the recurring hero. One reviewer put it plainly: “Installed this in a communication closet and finally don’t need a step stool and a flashlight to work on the back of my gear.” Another noted the time savings during a structured cabling job: “Terminated 48 ports in about half the time I budgeted because I could spin the rack around instead of crawling behind it.”

Build quality gets consistent shoutouts too — multiple reviewers compared it favorably to racks costing twice as much, and the pre-installed cage nuts saved setup time.

Where it falls short

The finish scratches more easily than I’d like. If you’re sliding equipment in and out frequently, you’ll see silver marks on the rails. Doesn’t affect function, but it shows wear quickly.

There are no cable management fingers included. For a rack this thoughtfully designed, that’s an oversight. Budget $30–40 for vertical cable managers. And the included hardware is only adequate — the drywall anchors are fine for lightweight setups, but the instructions assume you’re hitting studs for anything substantial.

Who should buy this

• Home lab enthusiasts who want rack-mount gear in a closet or garage without taking up floor space
• IT pros managing cramped wiring closets — the swing-out hinge genuinely saves time on every service visit
• AV installers mounting patch panels and switches above drop ceilings or on wall plates

Skip it if you need a fully enclosed rack for dust protection or if you’re mounting gear you’ll never touch again — in that case, a fixed rack saves you money.

FAQ

Can the hinge support heavy equipment like a full-depth server? No. This is designed for network gear — switches, patch panels, routers — up to about 100 pounds of equipment. Full servers belong in a floor-standing rack.

Does the rack swing both directions? The hinge is configured for one direction. Check your mounting orientation before drilling — you want the swing to open toward your working space.

What’s the actual usable depth? The 18-inch version gives you about 16.5 inches of usable depth. Measure your equipment’s depth before ordering. Tecmojo also makes 12-inch and 24-inch versions.

The Verdict

Buy it if you’re tired of working behind fixed wall racks and want proper rear access without sacrificing floor space. The build quality justifies the price, and the swing-out hinge is a genuine productivity upgrade for anyone who touches their network gear more than once.

Skip it if your setup is static and you’ll never access the rear after install — a fixed rack does the same job for less.

Rating: 4.6/5 — a well-engineered rack with a couple of minor oversights. The hinge design alone earns the price premium.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.