The Verdict

SAMSUNG OEM DG94-00520A Gas Range Igniter: The Right Part, If You’ve Got the Right Range

Let’s be direct: when your Samsung gas range’s oven won’t light, you don’t want to gamble. You want the exact part that came out of the factory. The SAMSUNG OEM DG94-00520A hot surface igniter is that part — in theory. In practice, this 3.7-star part with 185 ratings has a split personality: perfect for some, a frustrating miss for others.

What You’re Actually Getting

This is the genuine Samsung hot surface igniter — the ceramic glow-bar assembly that heats up to ignite gas in the oven burner. It includes the igniter body, the two wire leads, and the proprietary connector that plugs into your range’s harness. It’s a compact piece, roughly the size of a pack of gum, but it’s the difference between a working oven and a cold dinner.

What you won’t get: instructions. No diagram, no torque specs, no “here’s how to remove the old one.” Samsung assumes a technician is installing this. If you’re handy, that’s fine. If you’re not, watch a YouTube teardown specific to your model before you start.

The Real-World Performance Split

Here’s where the 3.7-star rating makes sense. Buyers who confirmed their model compatibility report a flawless fix:

“Exact match for my NX58H5600SS. Oven lights in about 10 seconds now. Works like factory.”

That’s the experience you want. The ceramic heats evenly, the resistance is within spec, and the connector clicks in with satisfying certainty. For these buyers, it’s a five-star part.

But a meaningful chunk of the 185 ratings tell a different story. The most common complaint is fitment — the connector doesn’t match their specific range, or the bracket holes don’t line up. One reviewer noted:

“Ordered this for my Samsung range, but the plug was different from the original. Had to return it.”

That’s not a defective part — it’s Samsung’s parts-bin chaos. The DG94-00520A fits a specific set of models, and if yours isn’t on the list, you’re stuck with a return.

There are also scattered reports of units arriving with bent pins or cracked ceramic. That’s concerning for an OEM part at this price point, and it suggests Samsung’s packaging doesn’t always survive the shipping gauntlet.

Where It Falls Short

Price-to-risk ratio. You’re paying OEM prices, and you’re still gambling on fitment. Before you order, pull your range’s model number (it’s on a sticker inside the oven door or drawer) and cross-reference it against the compatibility list. If you can’t confirm, this part is a coin flip.

No support. Samsung’s customer service won’t help you with installation, and the Amazon listing doesn’t offer troubleshooting guidance. You’re on your own.

QC variability. The bent pins and cracked ceramic reports — even if they’re a small minority — are unacceptable for a genuine part. Inspect the igniter immediately upon arrival.

Who Should Buy This

• DIY homeowners with a confirmed model match — you’ll get a perfect, reliable fix in under 30 minutes
• Appliance repair technicians — you know the part, you know the install, and you can verify compatibility before leaving the shop
• Anyone who’s already been burned by an aftermarket igniter that died in six months

Who should skip it: If you’re not certain about your model compatibility, or if you’re looking for a budget fix, consider a cheaper aftermarket igniter with a return-friendly policy. You might sacrifice OEM quality, but you’ll save money on the gamble.

FAQ

Q: Will this fit my Samsung range? A: Check the model number on the sticker inside your oven door or lower drawer. Cross-reference it against the compatibility list in the product description. If your model isn’t listed, don’t buy it — the connector is proprietary and won’t fit.

Q: Is this the igniter or the spark module? A: This is the hot surface igniter — the ceramic glow bar that heats up to ignite gas. The spark module is a different part. If your oven clicks but doesn’t light, you likely need the igniter. If there’s no clicking at all, it’s probably the module.

Q: Can I install this myself? A: Yes, if you’re comfortable with basic hand tools. Disconnect power, remove the oven floor or back panel, unplug the old igniter, and install the new one. But watch a model-specific video first — the access path varies significantly across Samsung ranges.

The Verdict

Buy it if: You’ve confirmed your model is compatible and you want the genuine Samsung part with proper OEM quality. It installs cleanly and restores your oven to factory operation.

Skip it if: Your model isn’t confirmed, you’re on a tight budget, or you don’t want to deal with a possible return. The 3.7-star rating reflects real fitment frustrations that a little pre-purchase research could have avoided.

Rating: 3.7/5 — A quality OEM part undermined by compatibility confusion and inconsistent quality control. Right for the right buyer, frustrating for everyone else.