PWR+ 12Ft Extra Long USB-Printer-Cable 2.0 for HP OfficeJet

The Verdict

Let’s be honest: nobody gets excited about a printer cable. You buy one because your desk layout forces your printer into a corner that’s exactly 11 feet from your computer, and the 6-foot cable that came with the printer is useless. The PWR+ 12Ft USB-Printer-Cable 2.0 exists to solve that one specific problem. After testing it with an HP OfficeJet Pro and a few other devices, here’s the real story.

What you actually get

This is a USB 2.0 cable with a standard Type-A connector on one end (goes into your computer) and a Type-B square connector on the other (goes into your printer). The cable is 12 feet long, measured tip to tip. The connectors are gold-plated, which isn’t just marketing — it does help prevent corrosion over time, especially in humid environments. The cable itself uses 28 AWG power wires and 24 AWG data wires, which is the thicker gauge you want for longer runs. Thin cables lose signal integrity past 10 feet; this one is built to spec.

Real-world performance

I plugged this into an HP OfficeJet Pro 9015, which is a common pairing based on the Amazon listing. It was plug-and-play — no driver issues, no “device not recognized” errors. The 12-foot length gave me plenty of slack to route the cable along the back of my desk and down to a floor-level printer without tension on either connector.

Data transfer speed is capped at 480 Mbps, which is the USB 2.0 ceiling. For printing, that’s irrelevant — even large photo files transfer faster than the printer can process them. I ran a 20-page document through and there were zero hiccups, no reconnection drops, no “printer offline” moments. The foil shielding does its job; I had the cable running parallel to a power strip for several feet and experienced no interference.

What buyers consistently praise

Looking through the 235 ratings (4.7 stars average), the dominant theme is reliability at distance. One reviewer wrote, “I needed to move my printer across the room and this was the only cable that worked without constant disconnects.” Another mentioned, “The gold tips and thick cord feel premium compared to the cheap cables I’ve bought before.” Multiple buyers specifically noted using it with HP OfficeJet models and confirming compatibility out of the box.

Where it falls short

The biggest complaint — and it’s legitimate — is that this cable is stiff. At 12 feet, that stiffness becomes a management problem. It doesn’t drape gracefully; it holds whatever curve you bend it into, which means you’ll likely need cable clips or zip ties to keep it tidy. One reviewer put it bluntly: “Great cable but it’s like wrestling a garden hose.”

Also worth noting: this is USB-A to USB-B only. If your computer only has USB-C ports (newer MacBooks, some thin-and-light Windows laptops), you’ll need an adapter. And if you’re buying for a newer printer with USB-C built in, this won’t fit. This cable is specifically for the older square-port printers still dominating home offices.

Who should buy this

• Home office workers with printers placed across the room or on a separate desk — this gives you the reach without signal loss.
• Small business users with HP OfficeJet or similar printers who are tired of flaky connections from cheaper cables.
• Anyone setting up a temporary workstation who needs a long, durable cable that won’t fail mid-print.

Skip it if you need USB-C compatibility, if your printer sits right next to your computer (a 6-foot cable is cheaper), or if you want a flexible, easily coilable cable for frequent moving.

FAQ

Q: Will this work with my HP OfficeJet 6978? A: Yes, if your printer has the standard square USB-B port. Most OfficeJet models from the last decade use this connector. Check your printer’s back panel — if the port is square, this works.

Q: Is 12 feet too long for USB 2.0? A: The official USB 2.0 spec says 16 feet is the maximum recommended length. At 12 feet with thicker 24 AWG data wires, you’re well within safe range. You won’t see any performance drop.

Q: Does this cable charge devices? A: No. This is a data-only printer cable. It carries a small amount of power for the printer’s interface, but it’s not meant for charging phones or tablets.

The Verdict

Buy it if: You need a reliable, long USB cable for a standard printer and want to set it up once and forget about it. The build quality justifies the slightly higher price than generic alternatives.

Skip it if: You need USB-C on either end, or you’re looking for a flexible cable to pack in a bag — this one is a permanent-install solution, not a travel accessory.

Rating: 4.6/5 — Deducting a half-star for the stiffness, which genuinely makes installation more tedious than it should be. But for its core job — delivering a stable connection at 12 feet — it performs flawlessly.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.