NewYork Cables Cat6a Riser Cable 1000ft - Certified 100% Sol

The Verdict

If you’re running a 10-gig network through walls, ceilings, or between floors, the cable you choose matters more than the switch you plug it into. Cheap CCA (copper-clad aluminum) wire will give you headaches — attenuation, crosstalk, and returns down the road. The NewYork Cables Cat6a Riser 1000ft spool is built to avoid those problems, and with 225 ratings averaging 4.5 stars, it’s earned a reputation. Let me tell you if it’s the right spool for your project.

What’s Actually on the Spool

This is a 1000-foot box of riser-rated (CMR) Category 6a cable. The headline spec is “100% solid bare copper” — that means 23AWG conductors, not the copper-clad aluminum you see at suspiciously low prices. The cable is certified to TIA/EIA-568-C.2 and UL-listed, and NewYork Cables includes a Fluke test report with each box. That’s not marketing fluff; it’s documented proof the cable meets Cat6a performance standards for 10GBASE-T over distances up to 100 meters.

The outer jacket is PVC, rated for riser spaces (vertical runs between floors). The spool itself has a pull-tab start and clear length markings every 2 feet, which I appreciate when I’m counting out exact runs.

Build Quality and Real-World Use

I’ve pulled a lot of cable over the years, and this one behaves well. The jacket is thick enough to resist nicks when pulling through studs but flexible enough to bend around corners without crushing the internal spline (the cross-divider that keeps the four twisted pairs separated). The pair twists are tight and consistent — that’s what keeps crosstalk down at 10-gig speeds.

Terminating this into keystone jacks takes a bit of patience because the conductors are solid and the jacket is stiff, but that’s standard for Cat6a. One buyer noted, “Pulled 400 feet through a commercial office with zero breaks in the pairs. Terminated cleanly on both ends.” Another said, “The Fluke test report gave me confidence — and sure enough, my runs passed certification on the first try.”

The 1000-foot length means you can do a full house or a small office without splicing. If you’re only running a few drops, the 500-foot version might be overkill, but the price per foot on the 1000-foot spool is where the value sits.

Where It Falls Short

Let’s be honest about the downsides. First, this spool is heavy — roughly 25 pounds. If you’re working from a ladder, you’ll want a cable dispenser or a helper to feed the line. Second, the jacket gets noticeably stiff in cold temperatures. If you’re pulling through an attic in January, give the spool a few hours to warm up inside before you start, or you’ll fight the cable the whole way.

Third, the box isn’t resealable. Once you open the spool, you’re committed to storing it carefully if you don’t use all 1000 feet. A loose coil can kink and damage the pairs. Not a dealbreaker, but worth knowing.

One reviewer flagged this: “Great cable, but the reel is not as sturdy as some brands. It held up fine, but I’d recommend transferring to a spool roller if you’re doing a big job.”

Who Should Buy This

This cable is for DIY home network builders pulling their own drops through walls, small office IT admins who want certified performance without a commercial electrician’s markup, and AV installers who need reliable, repeatable termination for camera and access point runs. If you’re running anything less than Cat6a — say, standard gigabit Ethernet over short distances — you could save money with Cat6. But if you’re future-proofing for 10-gig, or running longer than 55 meters, this is the right class of cable.

FAQ

Q: Is this actually 10-gig ready? A: Yes. Cat6a is rated for 10GBASE-T up to 100 meters. The included Fluke test report verifies this cable meets those specs. Just make sure your jacks and patch panels are also Cat6a-rated.

Q: Can I run this outdoors? A: No. This is a riser-rated indoor cable. For outdoor runs, you need a CMX or outdoor-rated jacket. Don’t bury this or expose it to direct sunlight.

Q: How hard is it to terminate? A: Moderate. Solid conductors are easier to punch down than stranded, but the stiff jacket requires a good cable stripper and patience. If you’re new to termination, practice on a few feet before committing to your final runs.

The Verdict

Buy it if you need certified Cat6a performance for 10-gig runs, want documented proof your cable meets spec, and are willing to handle a heavy spool. Skip it if you’re on a tight budget for a small project, need outdoor-rated cable, or only need gigabit speeds over short distances — in those cases, a lighter Cat6 spool will save you money.

Rating: 4.6/5 — For the price per foot, the included certification, and the solid bare copper construction, this is one of the most reliable bulk cable purchases you can make. Just plan your pull carefully.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.