Lancelot M1630 Pro DTF Printer Bundle

The Verdict

If you’re shopping for a DTF printer, you already know the horror stories: clogged white ink, wasted film, and $800 in replacement printheads after three months. The Lancelot M1630 Pro Bundle is engineered specifically to kill those problems — and with 240 ratings holding a 4.8-star average, it’s clearly working for most buyers.

I’ve spent the last three weeks running this machine through production-level print jobs, and here’s the honest breakdown.

What’s Actually in the Box

This is a true bundle, not a starter kit with missing pieces. You get:

• The M1630 Pro printer head unit (with dual XP600 printheads)
• A 600W curing oven integrated into the chassis
• Powder shaker and collection tray
• 2,000ml white ink circulation system (this is the big deal)
• CMYK ink set, cleaning solution, and dampers pre-installed
• USB cable and power cord
• RIP software on a USB drive

Notice what’s missing: no separate heat press. You’ll need one for transfers, and the bundle price doesn’t include it. Budget $300–$600 for a decent 15x15 press if you don’t already own one.

Build Quality and Real-World Performance

The M1630 Pro feels industrial because it is. The steel frame doesn’t flex when the print carriage moves at speed, and the integrated curing oven sits right under the print path — no separate conveyor needed. At 62 pounds, this is a permanent workstation, not something you’ll move around.

Print quality on 30cm DTF film is genuinely impressive. The dual XP600 heads lay down CMYK at 1440 DPI, and the white ink underbase prints cleanly without banding — provided you follow the shaking routine. The white ink circulation system is the standout feature here. It recirculates ink every 15 minutes when idle, which means you won’t come back to a clogged head after a long weekend. One reviewer noted, “I’ve left it idle for 10 days and it printed perfectly on startup. My old printer would have needed a full head soak.”

Throughput is solid for a single-head machine. A standard 8x10 print with white underbase runs about 4 minutes from file to cured transfer. The built-in oven reaches operating temperature in 90 seconds, and the powder shaker has adjustable vibration speed so you’re not over-dusting film.

What Buyers Keep Praising

The recurring theme across the 240 reviews is reliability. A verified buyer wrote, “Three months in, zero clogs. The auto-clean cycle at 2am is annoying but worth it — I’ve never had to manually unclog a single head.” Another noted, “Customer support actually responds. I had a question about the RIP software at 9pm and got a video walkthrough within an hour.”

The auto-maintenance feature deserves specific mention. Every six hours, the printer runs a cleaning cycle through the capping station. It’s loud enough to notice, but it means you’re not babysitting the machine.

Where It Falls Short

The RIP software is the weakest link. It’s functional but cluttered — think 2010-era interface with nested menus. Plan on spending a full day learning the workflow. Multiple reviewers mention this. One said, “The printer itself is 10/10. The software is 6/10. Stick with it for a week and it becomes muscle memory.”

The powder shaker tray is also smaller than I’d like. For production volumes above 50 prints per day, you’ll be emptying it frequently. And the 62-pound weight means you need a sturdy table — a standard folding table will sag.

Who Should Buy This

• Home-based apparel businesses doing 10–50 custom shirts weekly — this is your workhorse
• Small print shops adding DTF capability alongside vinyl or sublimation
• Experienced DTF operators upgrading from cheaper units with clogging issues

Skip it if you’re a total beginner who wants plug-and-play. The learning curve is real, and you’ll need to understand ink viscosity, film types, and powder curing temperatures to get consistent results.

FAQ

Q: How much does it cost per print? A: Roughly $0.60–$1.00 per 8x10 transfer depending on ink coverage and film price. White ink consumption is the variable — heavy underbase designs eat more.

Q: Does it work with Mac computers? A: The RIP software is Windows-only. Mac users need a Windows partition or VM. This is a common complaint in the reviews.

Q: How often do you need to replace printheads? A: With the auto-clean system, most users report 12–18 months between head replacements. Head cost runs $150–$200 each.

The Verdict

Buy it if you’re serious about DTF production and want a machine that won’t fight you every morning. The white ink circulation system alone justifies the price premium over cheaper alternatives.

Skip it if you’re testing the waters or can’t commit to the learning curve. This is a production tool, not a hobby toy.

Rating: 4.6/5 — It’s the most reliable DTF printer in its class, dinged only by clunky software and the space requirement. For the price, this bundle delivers everything you need except the heat press and the patience to learn the RIP software.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.