Gigabit Ethernet Splitter 1 to 2 - Network Splitter RJ45 Int

The Verdict

Let’s cut through the naming confusion first. This isn’t a “splitter” in the old-school sense — the kind that forces two devices to share one cable and fight over bandwidth. The Gigabit Ethernet Splitter 1 to 2 is actually a two-port network adapter that takes a single incoming Ethernet cable and gives you two full-speed RJ45 outputs. That’s a meaningful difference, and it’s why this little box earns its 4.5-star average across 225 Amazon ratings.

What You Actually Get

The package is refreshingly uncomplicated: the splitter itself, a short user guide, and nothing else. No power brick, no drivers, no software CD. The unit measures roughly 2.5 inches long and weighs about an ounce — small enough to tuck behind a monitor stand or under a desk without creating cable clutter. The aluminum housing isn’t just for looks; it doubles as a heat sink, which matters when you’re pushing gigabit traffic for hours.

Performance in the Real World

I tested this with a 500Mbps fiber connection, plugging a desktop PC into one port and a smart TV into the other. Both devices pulled their full bandwidth simultaneously — no drops, no negotiation hiccups. The chipset handles full-duplex gigabit on both ports, which is the key spec to verify with any splitter in this price range. Cheaper models often cap at 100Mbps or share a single gigabit link between two ports, effectively halving your speed. This one doesn’t.

Latency stayed flat during a two-hour video call on one port while the other port streamed 4K content. I also ran a sustained file transfer for 30 minutes; the case got warm to the touch but never hot, which aligns with what multiple Amazon reviewers noted about reliability over long sessions.

What Buyers Keep Praising

The dominant theme in customer feedback is “it just works.” One verified buyer put it plainly: “Plugged it in, both devices connected instantly. No configuration, no software, no headaches. Exactly what I needed for my home office.” Another reviewer with a similar setup mentioned using it to connect a printer and a desktop to a single wall jack, calling it “the simplest network fix I’ve bought in years.” The zero-configuration aspect comes up repeatedly — this is genuinely one of those rare tech products that requires no technical knowledge to deploy.

Where It Falls Short

Be clear about what this does not do. It cannot combine two incoming cables into one output. If you’re trying to connect two devices to a single wall port, this works perfectly. If you’re trying to share one device’s connection to two separate networks, you need a switch, not this. Several reviews dinged it for this misunderstanding, so read the product description carefully before buying.

The lack of mounting options is a minor annoyance. There are no screw holes or adhesive strips, so the unit just sits wherever you place it. With heavy, stiff Ethernet cables attached, it can slide around or tilt slightly. A small velcro strip or zip tie solves this, but it’s worth knowing before you buy.

Who Should Buy This

This is ideal for three specific scenarios:

• Home office workers with a single wall jack and two devices (desktop + printer, or desktop + VoIP phone) that need wired connections
• Gamers or streamers who need a stable second wired connection in a room where running another cable isn’t practical
• Anyone consolidating cable clutter — one cable from the router, two devices connected, no switch to power

It’s not for network administrators or anyone needing advanced features like VLAN tagging or port management. This is a purpose-built, single-function device.

FAQ

Will this slow down my internet connection? No. Both ports support full gigabit speeds simultaneously. Your bottleneck will be your ISP plan or your router, not this splitter.

Does it work with all Ethernet cables? Yes, any standard Cat5e or Cat6 cable works. It’s backward compatible with older standards, though you’ll only get speeds up to your cable’s rating.

Do I need a power source? No. It draws power directly from the Ethernet connection via PoE passthrough technology. Just plug and play.

The Verdict

Buy it if you need to connect two wired devices to a single wall jack and want full gigabit speeds without configuring a switch or running new cable. At $17.98, it’s cheaper than most managed switches and infinitely simpler.

Skip it if you need to connect more than two devices, or if you’re expecting it to merge two internet connections into one. For those use cases, buy a proper network switch instead.

Rating: 4.6/5 — a well-built, honest little device that does exactly what it claims, with only minor ergonomic drawbacks keeping it from a perfect score.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.