YINTATECH 60 2000lbs Clamp on Pallet Forks Heavy Duty Tract

The Verdict

If you own a compact tractor or skid steer and you’re tired of rigging straps and chains to move pallets, the YINTATECH 60" Clamp-On Pallet Forks are a budget-friendly gateway into material handling. But before you click buy, understand exactly what you’re getting — because at $300–$400 (depending on current pricing), these forks occupy a specific niche between cheap weekend-warrior tools and professional-grade quick-attach systems.

What’s in the box

YINTATECH ships the forks as a pair, each measuring 60 inches long with a 4-inch wide blade and a 1.5-inch thick heel section. The clamping mechanism uses two heavy-duty bolts per fork with rubber isolation pads that grip your bucket’s cutting edge. You also get anti-slip chains that run over the top of your bucket — these are critical, not optional. The package includes all mounting hardware, but you’ll want to supply your own blue Loctite before first use.

Real-world performance

The 2,000-pound capacity rating is honest only if you respect the physics. At ground level, you can finesse a bit more. But lift a loaded pallet to full height and the effective capacity drops — that’s true of any clamp-on fork, not just these. The steel is genuine 3/8-inch plate, and the welds are clean with full penetration at the critical stress points. I’ve seen these survive three seasons of moving 1,500-pound pallets of firewood without cracking.

The clamping system is where YINTATECH gets it right — mostly. The rubber pads protect your bucket’s paint and provide grip, and the chains prevent the forks from sliding sideways during turns. But multiple buyers note the same issue: “The bolts backed off after about two hours of use. I tightened them with an impact wrench and they held, but you absolutely need threadlocker.” That matches my experience. Plan on re-torquing after your first session.

Where it falls short

The biggest complaint across 220 ratings isn’t the steel or the welds — it’s the fitment. These forks clamp onto bucket edges between 5/16-inch and 3/8-inch thick. If your bucket has a rolled edge or a reinforced lip that’s thicker than 3/8-inch, you’ll be shimming or modifying. One verified buyer wrote: “Would not fit my John Deere 1025R bucket without grinding the mounting plates. Worked great after that, but be prepared.”

Also, there’s no stabilizer bar between the two forks. On uneven terrain, you’ll see independent fork movement, which can make precise pallet placement frustrating. It’s manageable, but it’s a constant reminder that this is a $300 tool, not a $1,200 one.

Who should buy these

• Compact tractor owners (Kubota BX, John Deere 1-series, Mahindra) with standard flat-edge buckets who need occasional pallet capability
• Homesteaders and small-acreage operators moving feed, seed, or firewood pallets a few times a week
• DIYers who want to avoid the $800+ cost of a dedicated quick-attach pallet fork frame

Skip them if you’re running a commercial operation, if your bucket has a thick reinforced edge, or if you routinely lift near the rated limit. In those cases, spend the money on a proper SSQA pallet fork attachment — the stability difference is night and day.

FAQ

Q: Will these fit my [insert tractor/bucket model]? Measure your bucket’s cutting edge thickness first. It must be between 5/16" and 3/8". Also verify your bucket depth — the clamp plates need about 4 inches of clearance behind the edge.

Q: Can I leave them mounted permanently? You can, but the clamp bolts will vibrate loose over time. Check them before every use, and consider removing them if you’re doing loader work that doesn’t involve pallets — they add about 90 pounds of dead weight and reduce your lift capacity.

Q: Do I need the anti-slip chains? Yes. Without them, the forks will slide sideways when you turn with a load. The chains are cheap insurance against dropping a pallet on something (or someone) important.

The Verdict

Buy it if you need occasional pallet-moving capability on a compact tractor and you’re willing to spend 30 minutes on initial setup plus periodic bolt checks. These forks punch above their price point for light-to-medium duty.

Skip it if you need daily commercial reliability, have a thick or rolled bucket edge, or want true parallel fork alignment for precise work.

Rating: 4.2/5 — A solid value with honest limitations. The steel is real, the capacity is usable, and the price is right. Just budget for threadlocker and a torque wrench before your first heavy lift.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.