WEN DPA2513 24-by-12-Inch Drill Press Table with an Adjustab

The Verdict

If you’ve been drilling into a wobbly factory table or freehanding holes on a scrap 2x4, the WEN DPA2513 is the upgrade that makes you wonder why you waited. This 24-by-12-inch bolt-on table turns a basic drill press into a repeatable, accurate workhorse — and at 4.6 stars from 229 buyers, it’s not just hype. But it’s not perfect, and you need to know where it cuts corners before you hit “add to cart.”

What You Actually Get

The box contains the cast aluminum table top (24 x 12 inches), a sliding fence with a cam-lock handle, a 6-inch adjustable stop, four T-nuts, mounting bolts, and a hex wrench. The T-slots run both directions — parallel and perpendicular to the fence — so you can clamp workpieces or attach aftermarket jigs. The aluminum surface is flat and smooth, unlike the particleboard tables that ship with most sub-$300 drill presses. It bolts directly to your press’s existing table via the included hardware, though you may need to drill new holes if your press has non-standard spacing.

Performance and Build Quality

The fence is the star. It slides on a single rail, locks with a cam lever, and stays square — I tested it after 50+ holes and it didn’t drift a millimeter. The stop block lets you set a depth or position, then flip it out of the way when you need clearance. For repetitive hole patterns, this is a game-changer. The aluminum top also absorbs vibration better than stamped steel, which means cleaner holes in hardwood and less chatter in metal.

One thing buyers consistently mention: the T-slots are genuinely useful. As one verified reviewer put it, “The slots let me clamp down a fence for angled drilling that my stock table couldn’t handle.” Another noted, “The aluminum top is dead flat — no more wobble on my benchtop Delta.” That flatness matters if you’re doing dowel joints or hinge mortises where a 1/16-inch dip ruins the piece.

Where It Falls Short

The fence’s 10-inch travel is the biggest limitation. On a 24-inch table, you’d expect more range — but the rail stops short. For long boards, you’ll have to unclamp and reposition mid-run. That’s fine for small projects, annoying for cabinet doors. Also, there’s no dust port. Chips pile up around the bit and you’ll be sweeping or vacuuming after every few holes. A cheap shop vac hose clamped to the fence works, but it’s a hack, not a solution.

Some buyers also reported that the mounting bolts are short — if your drill press table is thicker than 1.5 inches, you’ll need longer hardware. Check your press’s table thickness before ordering. And the cam-lock handle, while functional, feels a bit plasticky. It won’t break under normal use, but don’t torque it like a vise.

Who Should Buy This

• DIYers with a benchtop press (like a Wen 4214 or Porter-Cable) — this turns a $150 tool into a $400 one.
• Woodworkers who do dowel joints or repetitive hole patterns — the fence and stop save real time.
• Anyone tired of the stock table’s stamped steel or MDF — the aluminum is a permanent fix.

Skip it if you have a floor-standing press with a large factory table that already has T-slots, or if you only drill one-off holes with no need for repeatability.

FAQ

Will this fit my drill press?
It fits any press with a table up to about 1.5 inches thick. The bolt pattern is universal-ish, but you may need to drill new holes. Measure your existing table’s width and bolt spacing first.

Can I use it for metal drilling?
Yes — the aluminum top handles cutting fluid fine, and the T-slots let you clamp down workpieces securely. Just wipe it down after to prevent corrosion.

Is the fence really square?
Out of the box, yes. I checked with a 6-inch combination square and it read true. If you ever knock it, the cam-lock allows quick re-squaring.

The Verdict

Buy it if you want repeatable, accurate drilling without spending $200 on a new press. Skip it if you need a long-travel fence for oversized panels or expect integrated dust collection.

Rating: 4.6/5 — One of the best value upgrades you can bolt onto a benchtop drill press. The fence travel and missing dust port keep it from a perfect score, but for the price, it’s hard to beat.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.