Vimatto Double-Layer Chandelier of Carriage Wheel

The Verdict

If you’re scrolling through hundreds of identical drum shades and glass globes, the Vimatto Double-Layer Carriage Wheel Chandelier stops the scroll. This is a statement piece — a literal wagon wheel suspended from your ceiling, finished in matte black with two stacked tiers of six candle-style sockets each. It’s the kind of fixture that makes guests ask, “Where did you get that?” before they’ve even sat down.

What You Actually Get

The box contains the two-wheel assembly (upper and lower rings), twelve E12 sockets pre-wired to the central hub, a full set of mounting hardware, chain links, and threaded rods for height adjustment. The canopy is a simple round plate that covers a standard 4-inch junction box. As shown in the product image, the wheels are made from formed steel with a textured matte black powder coat — this isn’t the flimsy, glossy-painted aluminum you see on budget fixtures.

The dimensions matter here. The double-layer design measures roughly 23 inches in diameter and 19 inches tall without the chain. That’s substantial enough to anchor a dining room or great room, but not so oversized it overwhelms a 10x10 breakfast nook.

Build Quality and Installation Reality

The steel construction is genuinely solid. Multiple buyers noted the weight and rigidity of the rings — one reviewer wrote, “I was expecting something hollow and cheap, but the metal is thick and the welds are clean.” The matte finish is consistent across all surfaces, including the socket cups and the central hub.

Installation is the tradeoff for that two-tier look. The sockets come pre-wired, which saves time, but you still have to thread the chain through the upper wheel, attach the lower wheel to the down rods, then carefully connect the wiring harness before hanging the whole assembly. It’s a two-person job for the final lift — the fixture weighs around 18 pounds, and it’s awkwardly balanced. Budget a full hour if you’re doing it solo, closer to 45 minutes with a helper.

A note on bulbs: this fixture takes 12 E12 candelabra-base bulbs, and they’re not included. Plan for that cost upfront. Most buyers are using LED flame-tip bulbs to match the rustic aesthetic, which run about $2-3 each. If you’re putting this on a dimmer, confirm your bulbs are dimmable before you wire everything up.

What Buyers Consistently Praise

The visual impact is the headline. One five-star review captured it well: “It looks like it cost three times what I paid. The double layer gives it so much depth — it’s the first thing people notice when they walk in.” Multiple reviewers praised how the matte black finish hides dust and fingerprints, which matters for a ceiling fixture you’re not cleaning weekly.

The height adjustability also gets consistent shoutouts. The included rods and chain give you a range from about 24 inches to 60 inches of drop, and buyers with both 8-foot and 10-foot ceilings reported finding a configuration that worked without ordering extra parts.

Where It Falls Short

The assembly is the clear downside. A few reviewers mentioned the chain links were stiff and hard to separate without pliers, and the wiring nuts are small — if you have large hands, keep a pair of needle-nose pliers and electrical tape handy. The fixture is also not compatible with sloped ceilings unless you buy an angled adapter separately, which is a notable gap for a rustic-style fixture that often goes in cabins and A-frames.

There’s also the bulb count. Twelve sockets means twelve bulbs to replace over the life of the fixture. If a bulb burns out, you’ll notice it — the asymmetry is obvious with one dark socket in a two-tier design.

Who Should Buy This

This is for the homeowner who wants a farmhouse or industrial-rustic focal point without paying boutique lighting showroom prices. It’s ideal for dining rooms, two-story entryways, and great rooms with 9-foot-plus ceilings. If you’re furnishing a cabin, barndominium, or any space with wood beams, this fixture will look like it belongs.

Skip it if you need something flush-mount, have a sloped ceiling, or want a fixture you can install in under 30 minutes on a Tuesday night. This is a weekend-project light.

Frequently Asked Questions

Can I use it on a sloped ceiling? Not without an angled ceiling adapter, which is sold separately. The canopy and down rod are designed for flat, level ceilings.

What bulbs do I need? Twelve E12 candelabra-base bulbs. Most buyers use LED flame-tip bulbs in warm white (2700K) for the most authentic candle look. Make sure they’re dimmable if you’re using a dimmer switch.

Is the chain length adjustable? Yes. The kit includes multiple chain links and threaded rods, giving you a total drop range of roughly 24 to 60 inches.

The Verdict

Buy it if: You want a conversation-piece chandelier with real visual depth, and you’re willing to spend an hour on assembly and an extra $25 on bulbs.

Skip it if: You need a quick install, have a sloped ceiling, or prefer a simpler single-tier silhouette.

Rating: 4.6/5 — The Vimatto Double-Layer Carriage Wheel Chandelier delivers exceptional style per dollar. The assembly friction and missing bulbs keep it from a perfect score, but the build quality and finished look justify the effort. At this price point, it’s hard to find a fixture with this much presence that doesn’t look like a cheap replica.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.