VEVOR Hay Spear Spears 49 Hay Bale Spear Spike, 4000 lbs Ca

✅ PROS
- Easy and convenient to use
- Good value for the price point
❌ CONS
- May vary based on individual needs and preferences
- Check Amazon for current pricing and availability
The Verdict
Opening Hook
If you’ve priced hay spears lately, you know the jump from “cheap import” to “name brand” is roughly $150–$300. The VEVOR 49" Hay Bale Spear sits squarely in that gap, promising 4,000 lbs of capacity at a price that undercuts the big names by half. But does a budget spear hold up when you’re lifting a wet 5x5 bale that’s pushing 1,500 lbs? I’ve dug through the specs, the customer reports, and the failure points. Here’s the honest breakdown.
What You Actually Get
The box contains the spear itself — no mounting hardware, no pins, no safety chain. That’s worth knowing before you order. The spear measures 49 inches from collar to tip, with a 1.5-inch solid steel shaft that tapers to a point. The mounting plate is 7/8-inch thick steel with a standard 2-inch receiver tube. As shown in the product image, the design is straightforward: a single spike with a welded collar and a flat plate that bolts or pins into your loader bucket.
Real-World Performance
The 4,000 lb rating is the headline number, but let’s put that in context. Most compact tractors in the 25–45 HP range can’t lift anywhere near that anyway — your loader’s lift capacity is the real limit. What matters is whether the spear itself bends, and on that front, buyers are consistently impressed. One reviewer put it plainly: “I’ve moved over 200 bales this season and the spear hasn’t bent a quarter inch. My neighbor’s cheaper spear from another brand bent on the third bale.” That’s the kind of real-world stress test that matters more than a spec sheet.
The taper is aggressive enough to penetrate dense, tightly-wrapped bales without excessive downward force. Users report it slides into alfalfa and Bermuda bales cleanly. The 49-inch length gives you enough reach to fully impale a standard round bale while leaving room to maneuver in tight barn aisles.
What Buyers Keep Praising
The dominant theme in the 220+ ratings is value. At this price point, buyers expected to replace it within a season. Instead, they’re reporting years of service. One long-term owner wrote: “Three years in, used on a 40 HP Kubota, still straight, still sharp. I’ve hauled everything from hay to pallets of fencing.” The weld quality gets frequent mentions — clean beads, no cracks, no separation at the collar.
Where It Falls Short
The finish is the biggest complaint. The black paint is cosmetic-grade, not powder coat. On gravel driveways or concrete barn floors, it chips within weeks, and bare steel will start to surface-rust. This doesn’t affect function, but if you’re particular about your equipment looking sharp, budget for a can of rust-inhibitive paint.
The lack of a retainer pin is a legitimate oversight. A spear this heavy — roughly 30 lbs — needs to be secured properly, and many buyers have to make a separate trip to the hardware store. Also, the 2-inch receiver is standard, but if you have a skid steer or a quick-attach plate with different dimensions, you’ll need an adapter.
Who Should Buy This
This spear is ideal for the small-to-mid-size farm owner running a compact or utility tractor (25–60 HP) who moves a handful of bales per week. It’s also a smart choice for someone who needs a spear for occasional use — clearing land, moving pallets, or handling fence posts. If you’re running a commercial operation moving 50+ bales daily, you might want to step up to a brand with a stronger warranty, but for most buyers, this is more than enough.
FAQ
Q: Will this fit my John Deere/Kubota/New Holland loader? A: If your bucket has a standard 2-inch receiver tube, yes. If not, you’ll need a universal adapter plate (sold separately, roughly $40–$60). Measure your bucket’s receiver before ordering.
Q: Can I use this for anything besides hay? A: Absolutely. The 4,000 lb capacity and sharp point make it useful for moving pallets, lifting large spools of wire, or repositioning logs. Just be careful — the point is sharp enough to puncture more than just hay.
Q: How do I maintain it to prevent rust? A: Wire-brush any bare spots and apply a coat of cold-galvanizing spray or rust-inhibitive paint at the start of each season. Store it indoors or under a tarp if possible.
The Verdict
Buy it if: You need a reliable, heavy-duty spear for occasional-to-moderate use and don’t want to pay name-brand prices. The steel is solid, the weld quality is genuinely good, and it’ll handle anything your compact tractor can lift.
Skip it if: You’re running a commercial operation, need a spear with a multi-year warranty, or can’t tolerate surface rust on your equipment.
Rating: 4.2/5 — It’s not perfect, but at this price, it’s the best value hay spear on the market. The paint issue and missing pin are minor annoyances, not dealbreakers. For the money, this spear earns its keep.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.


