Talentedeco 10 Pack TA010 Matte Black Cabinet Pulls 3.75 Inc

The Verdict

Talentedeco TA010 Matte Black Cabinet Pulls Review: 10-Pack Value That Actually Holds Up

You’re staring at 20 drawer fronts and wondering if a $28.79 10-pack of cabinet pulls is going to look cheap or get the job done. Here’s the honest answer: the Talentedeco TA010 pulls in 3.75-inch (96mm) matte black land firmly in “surprisingly solid” territory. This is the kind of hardware that makes a $200 cabinet refresh look like a $800 upgrade — without the boutique price tag.

What’s Actually in the Box

Open the package and you get 10 pulls, 20 mounting screws, and a template. The pulls measure 3.75 inches overall with a 96mm hole-center spacing, which is the industry standard for most pre-drilled cabinet doors. That’s important: if your cabinets already have holes from a previous pull, these will slot right in. No re-drilling, no patching, no tears.

Each pull is die-cast zinc alloy — not the aluminum hollow stuff you find at big-box stores. Pick one up and you’ll notice the heft immediately. The matte black finish isn’t painted on; it’s a powder-coated treatment that holds up better than you’d expect at this price point. As one reviewer put it, “I was skeptical of the finish but after 6 months of daily kitchen use, they look exactly like the day I installed them.” That tracks with what I’ve seen from this category.

Real-World Performance and Fit

Installation is straightforward. The included template keeps spacing consistent, and with a Phillips head screwdriver you can have all 10 mounted in under 30 minutes. The pulls sit flush against the cabinet face with no wobble — the base plate is flat and machined properly, which isn’t always the case with budget hardware.

One thing to know: the depth of the pull is 1.18 inches, which gives your fingers comfortable clearance. If you’ve got thick drawer fronts or you’re mounting these on shaker-style doors with a center rail, check that your fingers won’t rub against the cabinet frame when pulling. It’s a minor consideration, but one that matters for daily use.

The matte black finish is the star here. It doesn’t show fingerprints the way glossy black or chrome does, and it blends well with both dark and light cabinet colors. If you’re mixing these with brushed nickel or stainless appliances, the matte black serves as a deliberate contrast rather than a mismatch.

What Buyers Consistently Praise

Scrolling through the 229 ratings at 4.6 stars, a few themes emerge. First, the value: “I priced out similar pulls at a local hardware store and this 10-pack cost less than 4 of theirs.” That’s the math that makes sense for a full kitchen overhaul. Second, the finish durability — multiple reviewers noted the matte black holds up to cleaning products and daily use without fading or discoloring. Third, the consistency: “All 10 pulls matched perfectly in color and size. No defects, no scratches, no crooked threads.” When you’re buying in bulk, that consistency is non-negotiable.

Where It Falls Short

Let’s be honest about the downsides. The included screws are 1 inch long. If you’re mounting these on 3/4-inch plywood or MDF drawer fronts with a backing plate, you might want longer screws from your local hardware store. It’s a $3 fix, but worth knowing upfront.

The finish, while durable, isn’t indestructible. If you drop a pull onto a tile floor or over-torque the screws with an impact driver, you can chip the coating. Hand-tighten with a screwdriver and you’ll be fine. One reviewer noted, “The screw heads are a bit soft — use a #2 Phillips and don’t strip them.” Good advice for any budget hardware install.

Who Should Buy These

This 10-pack makes sense for three specific situations: you’re updating a kitchen or bathroom with 10-15 pulls and want consistent hardware without paying boutique prices; you’re a landlord or flipper looking to refresh a property’s look for under $30; or you need replacement pulls because your old ones broke or the finish wore out. If you need a single pull for a single door, this isn’t your product — buy one individually instead.

FAQ

Q: Will these fit standard pre-drilled cabinet doors? A: Yes. The 96mm (3.75-inch) hole spacing is the most common standard. If your doors have old pulls with that spacing, these are a direct swap.

Q: Can I use these outdoors or in a bathroom? A: The matte black finish handles humidity well, so bathrooms are fine. Outdoors, the zinc alloy may corrode over time — keep them indoors.

Q: Do the screws work for thick drawer fronts? A: The included screws are 1 inch long. For thicker fronts, pick up #8-32 x 1.5-inch machine screws at a hardware store.

The Verdict

Buy it if you want a solid, good-looking cabinet pull that doesn’t break the bank and matches across your entire kitchen. The finish quality and zinc construction genuinely punch above the $2.88-per-pull price point.

Skip it if you need a single pull, you’re working with unusually thick drawer fronts, or you’re the type who replaces hardware every couple of years — these will outlast your desire to change them.

Rating: 4.6/5 — A reliable, well-made hardware value that performs like a more expensive product. Just budget for longer screws if your fronts are thick.

Note: As an Amazon Associate, I earn from qualifying purchases. Prices and availability accurate as of the publish date.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.