String Lights Hanging Kit,Globe String Lights Suspension Kit

The Verdict

So you bought those trendy globe string lights and realized you can’t just nail them to your deck. The cable hanging kit is the unsung hero of any outdoor lighting setup — and this one from Amazon’s catalog has earned its 4.7-star rating with 235 reviews. Here’s what you actually need to know before you buy.

What’s in the Kit

This is a complete suspension system, not a partial one. You get:

• 50 feet of 1/16-inch galvanized steel cable — the right gauge for string lights, not so thin it snaps, not so thick it’s a pain to work with
• 2 turnbuckles for tension adjustment
• 4 screw eyes for mounting points
• Thimbles and cable clips to create proper loop terminations
• A vinyl-coated hook for the light strand itself

The galvanized coating matters. It resists rust and corrosion from rain and humidity, which is the main enemy of outdoor hardware. In the product images, you can see the complete layout — everything laid out flat so you know what you’re getting before you buy.

Performance and Build Quality

The 1/16-inch cable is the sweet spot. It’s strong enough to hold multiple strands of commercial-grade globe lights with zero issue, but flexible enough to route around corners and through eye bolts without fighting you. Buyers consistently report the cable holds tension well over several months of outdoor exposure.

The turnbuckles are where this kit separates itself from cheaper alternatives. They let you dial in tension precisely — you can eliminate sag by tightening both ends gradually. One reviewer noted, “The turnbuckles made all the difference. My lights are perfectly straight across a 20-foot span.”

The screw eyes are substantial — not the flimsy ones that strip out of wood. They bite into pressure-treated lumber and deck posts without pre-drilling, though pre-drilling is always recommended for hardwoods.

What Buyers Consistently Praise

Looking at the 235 ratings, several themes emerge:

• Complete package: “Everything you need except the lights themselves. Even the cable clips are included.”
• Tension system works: “The turnbuckles are the star. I can adjust the sag without redoing the whole install.”
• Durable materials: “Survived a full New England winter including ice storms. No rust.”

Where It Falls Short

Honest tradeoffs you should know about:

No cable cutter included. This is the most common complaint in reviews. You’ll need wire cutters or bolt cutters to trim the cable to length. Most people have these or can borrow them, but it’s an extra step.

Minimal instructions. You get basic line drawings, not detailed step-by-step guidance. If you’ve never terminated a steel cable with thimbles and clips before, watch a quick YouTube tutorial first. The technique isn’t hard, but doing it wrong means the cable can slip through the clip under tension — dangerous and frustrating.

The vinyl-coated hook is a bit basic. It works fine for hanging the light strand itself, but some buyers replace it with a carabiner for easier seasonal removal.

Who Should Buy This

Buy it if: You’re installing globe string lights across a patio, deck, or backyard space. You’re reasonably handy and comfortable with basic tools. You want a system that will last more than one season.

Skip it if: You’re only hanging lights in a straight line between two close points (under 10 feet) where simple hooks might suffice. Or if you’re not comfortable working with steel cable and tension hardware at all.

FAQ

Q: Can this kit support heavy commercial globe string lights? A: Yes. The 1/16-inch galvanized cable has a working load limit well above what any residential string light setup will put on it. Even double strands of heavier patio lights are fine.

Q: Do I need to pre-drill holes for the screw eyes? A: For softwoods like pine or cedar, you can drive them directly. For hardwoods or composite materials, pre-drill a pilot hole slightly smaller than the screw eye shaft to prevent splitting.

Q: How do I keep the cable from sagging in the middle? A: Use the turnbuckles. Start loose, hang the lights, then tighten both turnbuckles gradually until the cable is straight. For runs over 25 feet, consider adding a center support post.

The Verdict

Buy it if you’re installing outdoor string lights and want a professional-looking, durable mounting system that won’t sag or rust. The included turnbuckles and complete hardware make this a genuine value.

Skip it if you have a very short, simple installation where basic hooks suffice — you’d be paying for capability you don’t need.

Rating: 4.6/5 — It loses half a star for the missing cable cutter and sparse instructions. Everything else delivers exactly what outdoor lighting installers need.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.