The Verdict

Replacement Parts Kit for iRobot Roomba 600 Series: The $25 Fix That Keeps Your Bot Alive

Your Roomba 675 just started leaving streaks of dust along the baseboards. The side brush is spinning lopsided, the filter is gray with grime, and the main brush makes a clicking sound. Before you drop $200+ on a new robot vacuum, know this: the parts that wear out on the 600 series are cheap, universal, and take less than ten minutes to swap. This replacement kit from Amazon—bundled for the 694, 675, 692, 695, and the rest of the 600 family—is exactly what you need to get another year out of your machine.

What’s Actually in the Box

This kit doesn’t skimp. You get:

• 4 filters (high-efficiency, washable)
• 4 side brushes (the three-arm style, with the standard screw)
• 2 main brushes (the multi-surface rubber-and-bristle combo)
• 1 cleaning tool (the little hook thing for hair wrap)

That’s a full maintenance cycle and then some. The filters are the key item here—they’re the single most replaced part on any Roomba, and having four on hand means you can rotate them every two weeks without waiting for shipping. The side brushes are the flimsy ones that snap or bend if your Roomba loves to eat lamp cords, so the four-pack is smart. The main brushes are the same multi-surface pattern as OEM—rubber fins for carpet, bristles for hard floors.

Build Quality and Real-World Performance

Here’s where most knockoff kits fail: the filters either don’t seat properly (causing the Roomba to error out) or they clog after two uses. I tested these in a 675 with a shedding dog and a 694 in a kitchen. The filters fit flush—no gaps, no “remove and clean filter” error spam. After two weeks of daily runs, the filter still holds its shape when rinsed. That’s the test that matters.

The main brushes are a mixed bag in the best way. The bristle stiffness matches OEM, and the hex nut on the end is molded correctly—it clicks into the drive gear without wobble. The side brushes screw on with the included screw (don’t lose it), and they don’t flex so much that they stop flicking debris into the suction path.

One honest note: the rubber fins on the main brush are slightly thinner than the iRobot brand ones. In my heavy-carpet test, they didn’t wear out faster, but if you have high-pile shag, you might see a little more shedding of the rubber over a year. For standard carpet and hard floors, this is a non-issue.

What Buyers Consistently Praise

The 235 ratings at 4.7 stars tell a consistent story. One buyer put it plainly: “I was about to throw my Roomba away because it kept stopping with brush errors. This kit fixed it instantly. The filters are way cheaper than the iRobot brand and work just as well.” Another noted the value: “Four filters and four side brushes for the price of one OEM filter. The fit is perfect on my 694.” The recurring theme is that buyers are shocked how quickly the kit revives a robot they’d already written off.

Where It Falls Short

Three things to know before you buy:

1. Screws are tiny and easy to strip. The side brush screw is a Phillips head, and if you overtighten, you’ll chew the head. Go slow, use a proper size driver (not a multitool), and you’ll be fine.
2. The cleaning tool is bare-bones. It’s a plastic hook, functional but not as sturdy as the iRobot brand one. It won’t break on first use, but it’s not a selling point.
3. No main brush bearing included. The 600 series has a small bearing on the end cap that wears out eventually. This kit doesn’t include it. If your Roomba is over three years old, consider ordering that separately—it’s a $5 part.

Who Should Buy This

• The budget-conscious owner who wants to keep a working 600 series running instead of upgrading.
• Multi-Roomba households — the four-filter/four-side-brush count means you can service two units.
• Pet owners — you’ll burn through filters monthly, and this kit makes that affordable.

Skip it if your Roomba is showing more serious failure signs—error 1 (bumper stuck), error 2 (cliff sensor), or a dead battery. This kit won’t fix those. Also skip if you own a 500 or 700 series; the parts are not compatible despite looking similar.

FAQ: 3 Questions Shoppers Actually Ask

Q: Will these parts fit my Roomba 614 or 671? A: Yes. The 600 series (614, 671, 675, 676, 690, 692, 694, 695, 960, 980 — wait, not the 900 series) — stick to the 600 line. The 614 through 695 all use the same filter, brush, and side brush geometry. If your model number starts with “6,” you’re good.

Q: Are the filters washable and reusable? A: Yes, rinse under warm water, let dry completely for 24 hours, and reuse. Each filter can handle 3–4 washes before it loses efficiency. That’s why four filters last a long time.

Q: How often should I replace these parts? A: Filter every 2–4 weeks (depending on pets and dust), side brush every 2–3 months, main brush every 4–6 months. If your Roomba starts leaving streaks or making clicking noises, it’s time.

The Verdict: Buy It If / Skip It If

Buy it if you own a Roomba 600 series and want to extend its life for under $25. The fit is OEM-accurate, the filter count is generous, and the savings over brand-name parts are massive.

Skip it if your Roomba has motor or battery issues, or if you expect OEM-level precision on the main brush rubber. For standard use, this kit is the smart buy.

Rating: 4.6/5 — Docked half a star for the missing bearing and the slightly thin rubber fins. Otherwise, this is the best value maintenance kit for the 600 series on Amazon.