Lightdot 6Pack 150W LED Wall Pack Lights, 3CCT Selectable (3

The Verdict

Lightdot’s 6-pack of 150W wall packs isn’t for everyone. At roughly 21,000 lumens per fixture, this is commercial-grade illumination — the kind of light that makes a parking lot look like a stadium. If you’re a homeowner looking to brighten one garage door, this is overkill. But if you’re a contractor, property manager, or farm owner, this six-pack could save you hundreds over buying singles.

What’s Actually in the Box

Each of the six boxes contains one 150W LED wall pack, a pre-wired junction box with three leads (black, white, green), and a gasket for surface mounting. The 3CCT selector is a small dial on the back of the housing — you set it before mounting, not after. Choose 3000K for warm, 4000K for neutral, or 5000K for daylight. The integrated photocell handles dusk-to-dawn automatically. No remote, no app, no smart-home integration. This is a work light, not a gadget.

Build Quality and Real-World Performance

The die-cast aluminum housing has a powder-coated finish that shrugs off weather. One buyer noted, “Installed these on a chicken coop in coastal Maine — salt air, snow, and rain. Six months in, zero rust, zero flicker.” The tempered glass lens stays clear, and the silicone gasket seals tight against the wall. IP65 rating means dust and water jets from any direction won’t hurt it.

The 150W output runs hot, but the cooling fins on the back handle it. In a 95-degree Texas summer, one reviewer measured the housing at 140°F — warm but not alarming. The driver is rated for 50,000 hours, and the five-year warranty covers failure. Expect consistent brightness with no visible flicker, even on cold starts.

What Buyers Consistently Praise

The value proposition drives most of the positive feedback. At roughly $40 per fixture when bought in this six-pack, you’re getting commercial-grade output for residential prices. One reviewer who manages a self-storage facility wrote: “Replaced sixteen 400W metal halides with eight of these — half the fixtures, twice the light, and my electric bill dropped by a third.” Another noted the color temperature switch saved them from ordering the wrong tint: “Set all six to 4000K in ten minutes. Perfect for a warehouse.”

Installation is straightforward for anyone comfortable with basic wiring. The junction box has knockouts on the back and side, and the gasket fits flush against siding or plywood. A reviewer with an auto shop mentioned, “Had all six up in two hours. Wired them to separate switches so I can light zones independently.”

Where It Falls Short

The fixed photocell is the biggest limitation. If you want lights on a timer or motion sensor, you’ll need to bypass the built-in sensor and wire an external control — a hassle. Sensitivity isn’t adjustable either; overcast days trigger them earlier than you might want.

The lack of included mounting hardware for masonry is another friction point. If you’re attaching to brick or stucco, budget for anchors. Also, these are heavy — about 12 pounds each. You’ll want a second person or a sturdy ladder bracket when mounting overhead.

Finally, the six-pack quantity is a commitment. Unless you have a large property or commercial building, you’ll end up with spares sitting in storage. Lightdot does sell singles, but the per-unit price jumps significantly.

Who Should Buy This

Commercial property owners — warehouses, storage facilities, strip malls. The six-pack economics work when you’re covering multiple entrances or perimeter walls.

Farm and ranch operators — barns, equipment sheds, livestock areas. The durability in harsh weather and the bright 5000K setting for nighttime work are genuine wins.

Contractors — if you’re wiring multiple buildings or doing turnkey commercial installs, this bundle gives you consistent fixtures for a whole job.

Residential buyers — only if you have a long driveway, large outbuilding, or want to light up a big backyard. For a single front door, buy one fixture, not six.

FAQ

Q: Can I use these with a motion sensor? A: Not directly. The built-in photocell handles auto on/off at dusk/dawn. For motion sensing, you’d bypass the photocell and wire an external sensor — doable but adds complexity.

Q: What’s the actual light spread? A: The beam is a wide 120-degree flood pattern. Mounted 10 feet up, it covers roughly a 30x30-foot area evenly. Good for perimeter lighting, less ideal for narrow walkways where you want a focused beam.

Q: Are they dimmable? A: No. These are fixed-output fixtures. No dimming capability, no smart controls. If you need dimming, look at a different product line.

The Verdict

Buy it if you need serious, reliable exterior lighting for a commercial or agricultural setting and want the best per-fixture price available. The build quality, brightness, and color temperature flexibility justify the investment.

Skip it if you’re a homeowner with modest lighting needs, want motion sensor integration, or don’t have a use for six fixtures. You’ll be paying for capacity you don’t need.

Rating: 4.6/5 — Outstanding value with minor convenience tradeoffs. The fixed photocell and lack of mounting hardware are the only real friction points. For the price per lumen, this is hard to beat.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.