Konlite - Full-Cutoff LED Wall Pack, Selectable Wattage & CC

The Verdict

If you’ve ever installed a wall pack only to realize the color temperature is a cold, alien blue when you wanted warm, or the light blasts upward into your neighbor’s bedroom window, you know the pain. The Konlite Full-Cutoff LED Wall Pack aims to end that frustration with a simple, practical design — and for the most part, it delivers.

I tested this fixture for two weeks on a detached garage, and here’s what 240 other Amazon buyers and I learned the hard way.

What’s Actually in the Box

You get the fixture itself (die-cast aluminum housing, tempered glass lens), a mounting bracket, and the hardware needed for standard junction box installation. No bulbs, no extra drivers, no surprises. The unit is pre-wired for 120-277V, which covers both residential and light commercial setups.

The standout feature is on the side: two small switches. One adjusts wattage (10W/20W/30W), the other adjusts color temperature (3000K/4000K/5000K). You can change both before mounting — or after, since they’re accessible from outside the housing. That’s genuinely useful if you’re not sure what brightness you need until you see it at night.

Build Quality and Real-World Performance

The housing feels substantial — not the flimsy stamped steel you get with some $30 competitors. The gasket seals tight, and the IP65 rating means it’s fully protected against dust and water jets. I hosed mine down after a dusty week and had zero issues.

Light output is where this thing earns its keep. The full-cutoff design means zero uplight escapes — every photon goes down where you need it. The beam spread is wide and even, covering a 20-foot expanse of wall and driveway without the hot spots and dark patches you get from cheaper reflectors.

At 30W, you’re getting roughly 3,000 lumens, which is plenty for a residential garage, side entrance, or back alley. The 5000K setting is crisp and clean; 3000K is warm and less bug-attracting. I settled on 4000K — a neutral middle ground that feels security-grade without the hospital vibe.

What Buyers Keep Praising

The “selectable” theme dominates the positive reviews. One verified buyer put it simply: “I set it to 20W/4000K and it’s perfect — no more guessing or buying three different fixtures.” Another noted the install was “surprisingly simple — took 15 minutes with basic tools.”

The full-cutoff optics get frequent shoutouts too. “No more light pollution into my upstairs window,” one reviewer wrote. “My HOA actually approved this one.”

Where It Falls Short

The mounting bracket is fixed — there’s no swivel. You need to aim the fixture during installation because you can’t adjust it afterward. Measure twice, tighten once.

At 30W, the housing gets noticeably warm to the touch after a few hours. It’s within spec and shouldn’t affect longevity, but it’s worth noting if you’re mounting it somewhere enclosed.

And while the 10W setting is great for a narrow walkway, it’s dim for larger areas. This isn’t a floodlight replacement — it’s a focused security wall pack.

Who Should Buy This

• Homeowners replacing an old dusk-to-dawn fixture with something energy-efficient and dark-sky compliant
• Landlords who need a reliable, low-maintenance light for rental properties
• Small business owners illuminating a rear entrance or loading dock without light trespass

Skip it if you need a motion-sensing fixture (this one is always-on or photocell controlled) or you want a 360-degree floodlight for a large yard.

Frequently Asked Questions

Q: Does it work with a photocell or motion sensor? A: Not built-in. You’ll need to wire an external photocell or sensor into the circuit. The fixture itself is always-on when powered.

Q: Can I change the wattage and color temperature after installation? A: Yes — the switches are accessible from the outside of the housing. No need to remove the fixture from the wall.

Q: Is it really full-cutoff? A: Yes. The lens is flat and flush with the housing, directing 100% of light downward. No uplight escapes.

The Verdict: 4.6/5 — Buy it if you want a flexible, durable, code-friendly wall pack that won’t annoy the neighbors.

Buy it if: You value adjustability, need dark-sky compliance, and want a fixture that’ll outlast the cheap alternatives.

Skip it if: You need motion detection built-in, or you’re expecting floodlight-level illumination for a large open area.

At this price point with a 4.8-star average from 240 ratings, the Konlite is the rare wall pack that does exactly what it promises — and gives you the flexibility to dial it in perfectly the first time.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.