KENES Tub Shower Faucet Set Complete, Brushed Nickel Tub and

The Verdict

The short version: If you’re remodeling a bathroom and want a complete tub/shower setup without piecing together five different brands, the KENES brushed nickel trim kit is a serious contender. It’s not the cheapest option, but it’s not the most expensive either — and what you get is a cohesive, well-built system that most buyers install without calling a plumber.

What’s actually in the box

This is a full trim kit, not just decorative handles. You get the pressure-balance valve body, the trim plate, two lever handles, a tub spout with diverter, a shower arm, flange, and a 1.8 GPM showerhead. As one buyer put it: “Everything I needed was in the box. I didn’t have to make a second trip to Home Depot.” That’s the real value here — complete kits save you the headache of mismatched finishes and incompatible fittings.

Build quality and real-world performance

The valve body is solid brass with ceramic disc cartridges — that’s the same internals you’d find in fixtures priced 40% higher. The lever handles move with a satisfying, precise detent, not the mushy feel you get from cheap zinc-alloy fixtures. The brushed nickel finish is applied evenly; no thin spots or drips, which matters because this finish hides hard-water spotting far better than polished chrome.

Installation is straightforward if you have basic plumbing experience. The valve uses standard 1/2" NPT connections, and the trim mounts with two screws. But here’s the honest caveat: the included instructions are sparse diagrams with minimal text. One reviewer noted, “The directions assume you’ve done this before. I had to watch two YouTube videos to figure out the diverter alignment.” Factor that in if you’re a first-timer.

What buyers consistently praise

• Complete package: Multiple reviewers highlight that nothing extra was needed — no separate cartridge, no additional escutcheon.
• Finish durability: The brushed nickel holds up well against daily use. “Six months in, still looks brand new. No peeling, no tarnishing,” reported one verified buyer.
• Smooth valve operation: The pressure-balance function works as intended, preventing scalding when someone flushes a toilet mid-shower.

Where it falls short

The diverter knob is the most common complaint. It requires a deliberate pull to switch from tub to shower, and a few buyers found it stiff for the first week. It loosens up, but if you have kids or elderly family members, test the action before finalizing your purchase.

The 1.8 GPM showerhead is also a point of contention. It meets federal water restrictions, but if you’re used to a high-pressure shower, you’ll notice the difference. You can swap the head, but then the finish won’t match perfectly.

Lastly, the trim plate is slightly thinner gauge metal than premium brands like Delta or Moen. It won’t flex under normal use, but it’s not the beefiest plate I’ve handled.

Who should buy this

• DIY remodelers who want a matched set without the premium markup of big-box brands.
• Landlords or flippers needing a reliable, decent-looking fixture that won’t generate callbacks.
• Anyone replacing a Moen or Delta valve — just verify your rough-in depth first; this valve is deeper than some older models.

Skip it if you’re a perfectionist about ultra-heavy trim plates or you need a high-flow showerhead. Also skip if you want a single-handle design — this is strictly a two-handle configuration.

FAQ

Q: Does this include the rough-in valve or just the trim? A: The valve body is included. You get everything from the pipe connections outward — valve, handles, spout, showerhead, arm, and flange.

Q: Will this fit my existing shower valve? A: Only if you’re replacing a KENES valve or doing a full rough-in. It won’t retrofit onto a Moen, Delta, or Kohler valve body. Check your existing valve brand before ordering.

Q: How hard is installation for a beginner? A: If you’ve soldered copper or used PEX before, you can handle it in about two hours. If you’ve never touched plumbing, hire a pro — the valve alignment is finicky and leaks are expensive to fix.

The Verdict

4.2/5 stars

Buy it if you want a complete, solidly-built tub/shower kit with a modern brushed nickel finish and you’re comfortable with basic plumbing.

Skip it if you need a high-flow showerhead, prefer a single-handle design, or demand the heft of a premium Delta fixture.

For the price point, this KENES set delivers 90% of the performance of fixtures costing twice as much. The minor quirks — stiff diverter, thin instructions — are acceptable tradeoffs for a kit that genuinely includes everything. Just verify your valve compatibility before ordering, and you’ll be showering in your new setup within a weekend.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.