Ironton Plastic Foldable Sawhorses, 1 Pair - 700-Lb. Total C

The Verdict

If you’ve ever wrestled a wobbly metal sawhorse that folds up mid-cut, you know the frustration. The Ironton Plastic Foldable Sawhorses aim to fix that with a rigid plastic frame, a 700-pound combined rating, and a price that undercuts most wooden alternatives. After digging through 215 ratings and testing the geometry against real workshop scenarios, here’s the honest breakdown.

What you actually get

The box contains two identical sawhorses, each rated at 350 pounds individually. They arrive fully assembled — no bolts, no Allen wrenches, no 20-minute assembly dance. Each unit measures roughly 31 inches tall with a 30-inch top surface. The legs fold inward via a center hinge mechanism, collapsing the pair to about four inches thick for storage. As shown in the product image, the design uses cross-bracing molded into the plastic rather than metal pins, which keeps weight down to about 12 pounds for the pair.

Build quality and real-world performance

The plastic is a thick, glass-filled polypropylene that feels closer to a contractor-grade toolbox than a cheap lawn chair. The top surface has a non-slip texture and slight lip on both edges — useful for keeping 2x4s from rolling off mid-measure. The legs lock open with a positive click, and there’s no lateral wobble when you lean into a cut.

Where these shine is sheet goods. A full 4x8 sheet of 3/4-inch plywood spans the pair with maybe a quarter-inch of bow in the middle — that’s acceptable deflection at this price point. One reviewer noted, “I’ve had these for two years and they’ve held up to daily use framing out a basement. The plastic doesn’t crack in cold weather like I worried.” Another echoed that durability: “Used them for a full kitchen remodel. They still lock tight and show zero stress cracks.”

The folding mechanism deserves credit. It’s a simple scissor-style collapse that doesn’t require pinching fingers or fighting springs. You can fold one with a single hand while holding a work piece in the other — that’s rare in this category.

Where it falls short

The feet are the weak point. On smooth garage concrete, they’ll slide when you’re ripping long boards with aggressive feed pressure. Several buyers mention this: “Works fine on my driveway, but on polished garage floor they skate.” A strip of rubber drawer liner or adhesive cabinet pads fixes it for under $5, but it’s an annoyance out of the box.

The fixed height is another limitation. At 31 inches, these are comfortable for average-height users standing upright, but if you’re over 6-foot-2 or prefer working at bench height, you’ll be bending. There’s no height adjustment — what you see is what you get.

Finally, the center seam on the top surface is a raised ridge. It’s subtle, but if you’re cross-cutting thin trim or veneer, the seam can catch the workpiece. Run a quick pass with sandpaper if it bothers you.

Who should buy these

• DIY homeowners doing weekend projects: drywall, paint, trim, temporary work surfaces. These replace rickety metal sawhorses with something that won’t collapse.
• Contractors needing portable support: the flat-fold design and 12-pound weight make them ideal for van or truck storage. One reviewer said, “I keep a pair in the work truck and they’ve replaced my wooden sawhorses entirely.”
• Apartment or small-shop users short on space: fold them flat, hang them on a wall hook, done.

Skip them if you need adjustable heights, work primarily on uneven ground (the plastic feet don’t self-level), or plan to exceed the 700-pound rating — that’s a hard no.

FAQ

Q: Can I use these with a circular saw on top?
A: Yes, but the surface is only about 4 inches wide. Clamp a straightedge or sacrificial board to the top for stable cuts.

Q: Will they hold a 350-pound person?
A: Technically rated for it, but I wouldn’t recommend standing on them. The top surface is narrow and the legs splay slightly under load. Use a proper ladder or step stool.

Q: Do they fold flat enough to fit between studs?
A: At roughly 4 inches thick folded, they’ll slide into most wall cavities or under a workbench. They won’t fit in a standard 3.5-inch stud bay, so plan accordingly.

The Verdict

Buy it if you want lightweight, genuinely foldable sawhorses that handle real work without the wobble of cheap metal alternatives. The 700-pound capacity is honest, the build quality exceeds the price point, and the flat-fold design is a genuine space-saver.

Skip it if you need height adjustability, work on polished concrete without adding grip, or expect to exceed the weight rating — those are the dealbreakers.

Rating: 4.2/5 — solid value with two fixable flaws.

Note: Prices fluctuate on Amazon. Check current pricing before ordering — these frequently see 10-15% discounts during holiday sales.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.