HEYMYTAP Waterfall Vessel Faucet, Tall Bathroom Faucet Brass

The Verdict

If you’ve ever stood at a vessel sink with a faucet that’s too short, you know the problem: water bounces off the back of the bowl, splashes your shirt, and the stream misses the drain entirely. The HEYMYTAP Waterfall Vessel Faucet solves that with a design that’s as functional as it is dramatic. This is a tall, wide-spout faucet built specifically for vessel sinks — and at 4.5 stars across 225 ratings, it’s clear buyers notice the difference.

What you actually get

The box contains the faucet body, a single-handle lever, mounting hardware, and two brass supply lines with standard 1/2-inch connections. The finish is a brushed brass that leans warm without tipping into shiny gold territory — it pairs well with oil-rubbed bronze fixtures and matte black accessories. The spout measures 5.9 inches wide, which is noticeably broader than the typical 3- to 4-inch faucet opening. Height comes in at 14.5 inches from the deck to the spout outlet, giving you clearance for most vessel bowls, including the deep 5- to 6-inch stone basins that often crowd out shorter faucets.

How it performs in the real world

The waterfall effect is the headline here, and it delivers. Turn the handle and water sheets evenly across the full width of the spout — no gaps, no sputtering, no narrow stream that misses the sink. The flow is laminar, meaning it’s smooth and bubble-free, which cuts down on splash significantly. One buyer noted, “The water looks like a mini glass curtain — it’s genuinely mesmerizing. My guests always comment on it.” Another mentioned, “I was worried about splash with a vessel sink, but the wide spout actually directs water straight down. No mess.”

The brass body has a reassuring heft to it — this isn’t a hollow, lightweight fixture. The lever handle moves with a smooth, damped action, and the ceramic cartridge inside is a standard size, so replacement parts are easy to find if you ever need them.

Where it falls short — be honest

The single-handle design is the main limitation. If you prefer separate hot and cold handles — common in traditional or farmhouse bathrooms — this won’t work for you. There’s no dual-handle variant in this lineup.

Also, the waterfall flow is beautiful but not fast. Because the water spreads across a 6-inch width, the stream is thinner than a standard faucet’s. Filling a basin takes noticeably longer — maybe 20 to 30 seconds more for a full sink. That’s fine for hand-washing, but if you routinely fill the basin for shaving or washing your face, it’s a minor annoyance. One reviewer put it plainly: “Love the look, but it takes a little longer to fill the sink. Not a dealbreaker, just something to know.”

Finally, the brushed brass finish requires a bit of care. It resists fingerprints better than polished brass, but hard water can leave spots. A quick wipe with a microfiber cloth after use keeps it looking sharp.

Who should buy this

This faucet is a strong fit for three buyer types:

• Vessel sink owners who’ve dealt with splashing or short faucets — the 14.5-inch height and 5.9-inch spout are built for these bowls.
• Modern or transitional bathrooms where the waterfall effect becomes a focal point — it genuinely elevates the look of a powder room or master bath.
• DIY installers — the mounting system uses a single hole with a wide base plate, and the supply lines are pre-attached. Most buyers report a 30- to 45-minute install with basic tools.

Skip it if you need a dual-handle setup, prefer a fast-filling aerated stream, or have a very shallow vessel bowl where the tall spout might look oversized.

FAQ

Q: Will this fit a standard 1-hole vanity? A: Yes. It requires a single 1.5-inch mounting hole. If your vanity has a 3-hole setup, you’ll need a deck plate to cover the extra holes.

Q: Does the brass finish tarnish over time? A: The brushed finish is sealed with a clear coat that resists tarnishing. With normal cleaning and wiping, it should hold up. Avoid abrasive cleaners, which can wear the coating.

Q: Is the waterfall flow adjustable? A: The flow rate is fixed by the cartridge, but you can control water volume with the handle. The waterfall effect is consistent across the spout width regardless of handle position.

The Verdict

Buy it if you want a statement piece for your vessel sink that actually functions well — the tall height, wide spout, and even flow solve real problems, not just aesthetic ones.

Skip it if you need a dual-handle faucet, prioritize fast basin filling over visual drama, or have a compact vanity where a 15-inch-tall fixture would feel overwhelming.

The HEYMYTAP Waterfall Vessel Faucet earns its 4.5-star rating. It’s well-built, thoughtfully sized for vessel sinks, and delivers the dramatic waterfall effect without the usual splash problems. For a bathroom upgrade that guests will notice and you’ll appreciate daily, this is a solid investment at a fair price.

Rating: 4.6/5

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.