Brita Longlast Replacement Water Filter for Pitchers, 120 gallon each water filter with 99% lead removal, 2ct

The Verdict

The 6-Month Filter That Actually Delivers: Brita Longlast Tested

Most pitcher filters are a quarterly chore. You mark the calendar, swap the cartridge, and wonder if the water actually tastes different. The Brita Longlast changes that math — doubling down on capacity while adding certified lead reduction. At $47.71 for a 2-pack, that’s $0.20 per gallon of filtered water. But does the extended lifespan come with tradeoffs? I tested two of these across a full replacement cycle to find out.

What’s Actually in the Box

You get two cylindrical filters, each rated for 120 gallons or roughly six months of normal household use. That’s triple the capacity of Brita’s standard filters (which tap out at 40 gallons). The construction uses a coconut-based activated carbon core surrounded by non-woven mesh — the same media Brita uses in their higher-end faucet systems. Each filter measures about 4.5 inches tall and fits standard Brita pitchers and dispensers. One important note: these do not fit the Stream or Slim models. Double-check your pitcher’s model number before ordering.

Performance and Real-World Use

The Longlast filter removes 99% of lead (NSF/ANSI 53 certified), 97% of mercury, and reduces chlorine taste and odor. But what does that taste like in practice? I ran side-by-side tests with tap water and filtered water from the same faucet. The filtered water came out noticeably cleaner — no chlorine bite, no metallic aftertaste. The lead reduction claim isn’t just marketing; it’s independently verified, which matters if you’re on older plumbing or a municipal system with known lead service lines.

Activation takes 10 minutes: submerge in cold water for 5 minutes, shake, repeat once. That’s faster than many competitors that demand overnight soaking. The drip rate, however, is slower than Brita’s standard filters — especially in the first week. If you’re filling a 10-cup pitcher, budget an extra minute or two. It’s not a dealbreaker, but it’s worth knowing.

What 37,000+ Buyers Say

The 4.6-star average across 37,212 ratings reflects consistent satisfaction. One verified buyer noted: “I’ve been using Brita for years and these Longlast filters are the best value — I only replace them twice a year instead of every two months.” Another praised the lead reduction: “We have old pipes in our building. Knowing this filter is certified for lead gives me peace of mind for my kids.” Common praise centers on the six-month lifespan and the cost-per-gallon math working out cheaper than standard filters.

Where It Falls Short

The slower flow rate is the most frequent complaint in critical reviews. Some users also reported the filter indicator on their pitcher showing “replace” before the full six months — though Brita says this is a timer, not a saturation indicator, so it’s not measuring actual filter life. A few buyers noted the filters don’t fit their older pitcher models; again, compatibility matters. And if you’re renting or just want basic taste improvement, the standard Brita filter at half the price might be overkill.

Who Should Buy This

• Homeowners with older plumbing: The certified lead reduction is a genuine safety upgrade, not just taste improvement.
• High-volume water drinkers: If you go through a pitcher daily, the 120-gallon capacity means fewer replacements and less waste.
• Families on municipal water: Chlorine and sediment reduction is noticeable, and the six-month cycle is easier to track than quarterly swaps.

Skip It If: You have a Stream or Slim pitcher, you’re on a tight budget and want the cheapest upfront option, or you’re replacing a filter that’s still working fine — the Longlast only pays off if you use it for its full lifespan.

FAQ: What Shoppers Actually Ask

Q: How often should I replace the Longlast filter? Every 120 gallons or six months, whichever comes first. If you have a large family or use a dispenser, you might hit 120 gallons closer to four months.

Q: Does it really remove lead? Yes — it’s NSF/ANSI 53 certified for 99% lead reduction. That’s third-party verified, not just a marketing claim.

Q: Will it fit my Brita pitcher? It fits standard Brita pitchers and dispensers, but not Stream or Slim models. Check the underside of your pitcher lid for the model number before ordering.

The Verdict

Buy it if you want a six-month filter with certified lead removal that works out to roughly $0.20 per gallon. Skip it if you have a non-compatible pitcher or you only filter water occasionally — the standard Brita filter would be more economical.

Rating: 4.6/5 — The extended lifespan and certified lead reduction make this the smarter long-term value, despite the slightly slower flow rate.

Where to Buy

👉 Check Price on Amazon →

We earn a small commission at no extra cost to you — this helps fund more honest reviews.

Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.